English / USA
Storing the Machine
Replacing Wheels
For periods of about 3 months or longer
:
Drain and clean the fuel tank in a
well ventilated area.
:
Dispose of remaining fuel and
cleaning solution properly in
accordance with local
1
2
environmental requirements.
:
Run engine until carburetor is dry –
this helps prevent the carburetor
diaphragms sticking together.
Depth wheel
Gearbox wheel
:
:
Remove, clean and inspect the
cutting blade.
Have a worn wheel replaced by your
dealer*.
Have a worn wheel replaced by your
dealer*.
Thoroughly clean the machine – pay
special attention to the cylinder fins
and air filter.
:
The end of the thread on screw (1)
is caulked to ensure that the
wingnut (2) does not work loose and
be lost.
The wheel helps protect the
gearbox from wear. If the gearbox
wheel is worn, also check the wear
guard (arrow) and the gearbox for
signs of damage – see “Checking
and Replacing the Wear Guard”.
:
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
A very high torque has to be applied
to remove the wingnut from the screw.
If the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by your
dealer
*
STIHL recommends a STIHL
servicing dealer
*
STIHL recommends a STIHL
servicing dealer
30
FC 110
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 3110 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)