STIHL FC 75 Edger Owners Manual

English / USA
Mounting the Loop Handle
Adjusting the Throttle Cable
A properly adjusted throttle cable is
the precondition for correct
operation in the full throttle, starting
throttle and idle positions.
Adjust the throttle cable only after
the unit is fully assembled – the
control handle must be in the normal
operating position.
1
4
2
3
5
A
50 mm
( 2" )
:
Use a suitable tool to push the slide
to the bottom of the slot (see
illustration).
:
:
Fit the loop handle (1) on the drive
tube 8" / 20 cm (A) forward of the
control handle (2).
Position the clamp (3) against the
drive tube and slide it into the loop
handle.
:
Fit square nut (4) in the loop handle,
insert the clamp screw (5) from the
other side and tighten down
securely.
Adjusting loop handle to most
comfortable position:
:
:
Release clamp screw (5).
Move the loop handle along the
drive tube as required - retighten the
clamp screw.
16
FC 75
Product Specification
CategoriesSTIHL Straight Edger Manuals, Straight Edger Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 82 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website