English / USA
Lubricating the
Gearbox
If engine is down on power, difficult to
start or runs poorly at idling speed, first
check the spark plug.
:
Remove spark plug – see "Starting /
Stopping the Engine".
2
:
:
Clean dirty spark plug.
Check electrode gap (A) and
readjust if necessary – see
"Specifications".
:
Use only resistor type spark plugs
of the approved range.
1
1
Rectify problems which have caused
fouling of spark plug:
:
:
:
Too much oil in fuel mix.
Dirty air filter.
Unfavorable running conditions,
e.g. operating at part load.
Fit a new spark plug after approx.
To reduce the risk of fire and burn
injury, use only spark plugs
Check grease level regularly, about
every 25 hours of operation.
:
:
100
operating hours
or earlier if the electrodes are badly
eroded.
authorized by STIHL. Always press
Unscrew the filler plug (1).
If no grease can be seen on the
inside of the filler plug,
spark plug boot
(2)
snugly onto
spark plug terminal (1) of the proper
size. (Note: If terminal has
screw the tube (2) of STIHL gear
lubricant for brushcutters – see
"Special Accessories" – into the filler
hole.
detachable SAE adapter nut, it must
be attached.)
A loose connection between spark
plug boot and ignition wire
:
:
Squeeze up to 1/5 oz (5 g) grease
connector in the boot may create
arcing that could ignite combustible
fumes and cause a fire.
into the gear housing.
Do not completely fill the gear
housing with grease.
Refit the filler plug and tighten it
down firmly.
26
FC 75
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 75 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)