STIHL FH Power Scythe Owners Manual

English / USA
Striking solid foreign objects such as
stones, fence wire or metal could
damage the cutting attachment and may
cause blades to crack, chip or break.
STIHL does not recommend the use of
your power tool when cutting in areas
where the blades could contact such
objects.
Check the cutting blades at regular short
intervals during operation, or
immediately if there is a noticeable
change in cutting behavior:
MAINTENANCE, REPAIR AND
STORING
Maintenance, replacement, or repair
of the emission control devices and
systems may be performed by any
nonroad engine repair establishment
or individual. However, if you make a
warranty claim for a component
which has not been serviced or
maintained properly or if
Shut off the engine.
Wait until the cutting blades have
come to a complete standstill.
Check condition and tightness, look
for cracks.
!
Warning
Observe the cutting blades at all times –
do not cut any areas that you cannot
see. When cutting the top of a taller
hedge, check the other side of the hedge
frequently for bystanders, animals and
obstructions.
Check sharpness.
nonapproved replacement parts were
used, STIHL may deny coverage.
Replace damaged or dull cutting
tools immediately, even if they have
only superficial cracks.
!Warning!
Use only identical STIHL replacement
parts for maintenance and repair. Use of
non STIHL parts may cause serious or
fatal injury.
!Warning
Danger!
The gearbox becomes hot during
operation. To reduce the risk of burn
injury, do not touch the gear housing
when it is hot.
Your power tool is not
insulated against electric
shock. To reduce the risk
Strictly follow the maintenance and
repair instructions in the appropriate
section of your power tool and
of electrocution, never
operate this power tool in the vicinity of
any wires or cables (power, etc.) which
may be carrying electric current.
attachment instruction manuals. Please
refer to the maintenance chart(s) and
maintenance notes in these manuals.
After Finishing Work
Always clean dust and dirt off the
machine – do not use any grease
solvents for this purpose.
!
Warning!
If the cutting tool becomes clogged or
stuck, always turn off the engine and
make sure the cutting tool has stopped
before cleaning. Grass, weeds, etc.
should be cleaned off the cutting tool at
regular intervals.
Spray the blades with STIHL resin
solvent. Start and run the engine briefly
so that the solvent is evenly distributed.
FH
9
Product Specification
CategoriesSTIHL Straight Edger Manuals, Straight Edger Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 38 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website