English / USA
Approved Basic Power
Tools
Mounting the Attachment
Operation of STIHL power scythe
attachments is permitted only with the
following basic power tools:
STIHL FS 83 , STIHL FS 851)2),
1)
STIHL FS 90 , STIHL FS 1101)2),
1)
1)
STIHL FS 130 , STIHL FC 83,
STIHL FC 85, STIHL FC 110,
STIHL HL 73 , STIHL HL 753)4)
3)4)
,
STIHL HL 1003)4)
10
5
Loop-handled machines must be
equipped with a barrier bar before
using the power scythe attachment.
9
9
L
Other combinations of the
attachment andnon-approved basic
power tools are not permitted since
they may result in accidents or
serious personal injury.
Preparations
Mounting the Cutting Head
:
Loosen the clamp screws on the
basic power tool’s gearbox housing
and pull the gearbox off the drive
tube.
:
:
Loosen the clamp screws (9).
Push the gearbox (10) on to the
drive tube (5) – turn the gearbox
back and forth at the same time.
The drive shaft may slip out of the
tube in this process. If this happens,
push the drive shaft back into the
tube.
The drive shaft must not project from the
tube more than L = 0.9" (22 mm). If
necessary, apply slight pressure to the
drive shaft and rotate it slowly at the
same time until it can be pushed in to the
required length.
1)
2)
Loop-handled and bike-handled
versions
Not approved for use with
STIHL FS 85 RX, STIHL FS 110 RX
Loop-handled versions
Not approved for use with
STIHL HL 73 K, STIHL HL 75 K,
STIHL HL 100 K
3)
4)
FH
11
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FH |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)