English
The deflector may be
used in combination with
mowing heads.
proper control and less fatigue in
operation. To be better prepared in case
of an emergency, practice releasing the
unit from the harness as quickly as
possible.
Warning!
Your power tool is a one-person
machine. Do not allow other persons in
the general work area, even when
starting.
The deflector may be
used in combination with
grass cutting blades.
Starting
Start the engine at least 10 feet (3 m)
from the fueling spot, outdoors only.
Warning!
For specific starting instructions, see the
appropriate section of your manual.
Place the power tool on firm ground or
other solid surface in an open area.
Maintain good balance and secure
footing.
To reduce the risk of injury from loss of
control, do not attempt to "drop start"
your power tool.
The deflector may be
used in combination with
brush knives.
Warning!
When you pull the starter grip, do not
wrap the starter rope around your hand.
Do not let the grip snap back, but guide
the starter rope to rewind it properly.
Failure to follow this procedure may
result in injury to your hand or fingers
and may damage the starter
The deflector must not be
used in combination with
mowing heads.
Warning!
To reduce the risk of injury from blade or
line contact, be absolutely sure that the
cutting attachment is clear of you and all
other obstructions and objects, includ-
ing the ground, because when the
engine starts at starting-throttle, engine
speed will be fast enough for the clutch
to engage and move the cutting
attachment.
mechanism.
The deflector must not be
used in combination with
grass cutting blades.
Important Adjustments
Warning!
Once the engine has started,
immediately blip the throttle trigger,
which should release the starting throttle
and allow the engine to slow down to
idle.
To reduce the risk of personal injury
from loss of control or contact with the
running cutting attachment, do not use
your unit with incorrect idle adjustment.
At correct idle speed, the cutting attach-
ment should not move. For directions on
how to adjust idle speed, see the appro-
priate section of your instruction
manual.
The deflector must not be
used in combination with
brush knives.
With the engine running only at idle,
attach the power tool to the spring hook
of your harness (see appropriate
chapter of this manual).
The deflector must not be
used in combination with
circular saw blades.
If you cannot set the correct idle speed,
have your STIHL dealer check your
power tool and make proper
Adjust carrying harness and hand grip to
suit your size before starting work. The
machine should be properly balanced as
specified in your instruction manual for
adjustments and repairs.
8
FS 260 C, FS 360 C
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL 360 C, STIHL FS 260 C |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)