English
STIHL TrimCut 31-2,
STIHL FixCut 25-2,
STIHL PolyCut 20-3
STIHL TrimCut 31-2,
STIHL FixCut 25-2,
STIHL PolyCut 20-3
Mounting metal cutting attachments
N
Unscrew the mowing head
clockwise.
1
Adjusting nylon line
STIHL SuperCut
2
Fresh line is advanced automatically if
remaining line is still at least 2.4 in
(6 cm) long. The blade on the deflector
trims surplus line to the correct length.
1
3
STIHL AutoCut
N
Hold the rotating mowing head
above the ground – tap it on the
ground once – about 1.2 in (3 cm)
fresh line is advanced.
The blade on the deflector trims surplus
line to the correct length – avoid tapping
the mowing head more than once at a
time.
The nut (1), rider plate (2) and thrust
washer (3) are required to mount a
grass cutting blade. The parts are
available as special accessories.
N
Screw the mowing head
counterclockwise on to the shaft (1)
as far as stop.
Line feed operates only if both lines still
have a minimum length of 1 in (2.5 cm).
N
N
Block the shaft.
Check direction of rotation of cutting
attachment
Tighten down the mowing head.
All other mowing heads
Remove the tool used to block the
shaft.
Refer to the instructions supplied with
the mowing head.
Removing the mowing head
To reduce the risk of injury, always
shut off the engine before
adjusting the mowing line by
hand.
N
Block the shaft.
1
2
STIHL SuperCut 20-2,
STIHL AutoCut 25-2,
STIHL AutoCut C 25-2,
Replacing nylon line or cutting
blades
Cutting edges of grass cutting blade (1)
may point in either direction.
Cutting edges of grass cutting blade (2)
must point clockwise.
Refer to the instructions supplied with
the mowing head.
FS 70 RC
19
Categories | Blower Vacuum and Sweeper Manuals, STIHL Trimmer Manuals, Trimmer Manuals |
---|---|
Tags | STIHL FS 70 |
Download File |
|
Language | English, Español |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)