English
Horizontal cut
Connecting Charger to
Power Supply
Charging the Battery
Mains voltage and operating voltage
must be the same.
The battery is given a charge of about
30% before leaving the factory.
It must be fully charged before you use
the power tool for the first time.
1 2
N
Connect the charger to the power
supply – mains voltage and
operating voltage of the charger
must be the same – see
"Connecting Charger to Power
Supply".
Operate the charger only in enclosed
and dry rooms at ambient temperatures
between 41°F (5°C) and 104°F (40°C).
N
Insert the mains plug (1) in the wall
outlet (2).
Hold the cutting blade at an angle of 0°
to 10° as you swing the hedge trimmer
horizontally, using both sides of the
blade.
2
1
Swing the cutting blade in an arc
towards the outside of the hedge so that
the cuttings are swept to the ground.
A self test is performed after the charger
is connected to the power supply. During
this process the light emitting diode (1)
on the charger lights up green for about
N
Push the battery (1) into the
charger (2) until you feel noticeable
resistance – then push it as far as
stop.
1
second, then red and goes off again.
Repeat the procedure several times on
wide hedges.
1
2
HSA 65
| Categories | Hedge Trimmer Manuals, STIHL Hedge Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL HSA 65 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)