english
Checking Chain Lubrication Adjusting Telescopic Shaft
(HT 75)
1
2
The bayonet-type oil tank filler cap with
its hinged clip can be opened and closed
without tools.
The saw chain must always throw off a
small amount of oil.
:
Always check chain lubrication and
the oil level in the tank before
starting work.
:
To open the tank, swing the clip (1)
to the vertical position.
:
Turn the filler cap counterclockwise
Never operate your pruner without
chain lubrication. If the chain is run
dry, the whole cutting attachment
will be irretrievably damaged within
a very short time.
Inadequate lubrication can be caused by
a dirty oil strainer: Have the oil strainer
cleaned or replaced by your STIHL
dealer.
as far as stop and remove.
:
:
Fill up with chain oil.
To close the oil tank, place the filler
cap in position with the clip vertical,
making sure the recesses (2) are in
alignment.
Always shut down the engine and put
on the chain guard!
:
:
:
Slacken off the screw.
Adjust shaft to required length.
Tighten the screw firmly.
:
:
Turn the filler cap clockwise as far
as stop.
Every new chain has to be broken in
for about 2 to 3 minutes.
Fold the clip down so that it is flush
with the top of the cap.
After breaking in the chain, check
chain tension and adjust if
necessary – see chapter
"Checking Chain Tension".
HT 70, HT 75
21
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL HT 70, STIHL HT 75 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)