english
Operating Instructions
During break-in period
Cold chain
After a long period of full-throttle
operation
Tension is correct when the chain fits
snugly against the underside of the bar
and can still be pulled along the bar by
hand.
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
Allow engine to run for a while at idle
speed so that the heat in the engine can
be dissipated by flow of cooling air. This
protects engine-mounted components
(ignition, carburetor) from thermal
overload.
Retension if necessary –
see chapter “Tensioning the Saw Chain”.
Chain at operating temperature
The chain stretches and begins to sag.
The drive links on the underside of the
bar must not come out of the bar groove
After finishing work
:
Slacken off the chain if you have
–
the chain may otherwise jump off the
Do not make the mixture leaner to
achieve an apparent increase in
power – this could damage the
engine – see chapter “Adjusting the
Carburetor”.
retensioned it at operating
bar.
temperature during cutting work.
Retension the chain –
see chapter “Tensioning the Saw Chain”.
The chain contracts as it cools down. If it
is not slackened off, it may damage the
crankshaft and bearings.
Wait for engine to cool down. Drain the
fuel tank. Store the machine in a dry
place. Check tightness of nuts and
screws (not adjusting screws) at regular
intervals and retighten as necessary.
Always slacken off the chain again
after finishing work. The chain
contracts as it cools down. If it is not
slackened off, it may damage the
crankshaft and bearings.
During operation
Check chain tension frequently!
A new chain has to be tensioned more
often than one that has been in use for
some time.
HT 70, HT 75
27
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL HT 70, STIHL HT 75 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)