english / USA
Checking Chain Lubrication Adjusting Telescopic Shaft
Fitting the Harness
1
The saw chain must always throw off a
small amount of oil.
2
:
Always check chain lubrication and
the oil level in the tank before
starting work.
Never operate your pruner without
chain lubrication. If the chain is run
dry, the whole cutting attachment
will be irretrievably damaged within
a very short time.
Inadequate lubrication can be caused by
a dirty oil strainer: Have the oil strainer
between the tank and pump cleaned or
replaced by your STIHL dealer.
Always shut down the engine and put
on the chain guard.
Shoulder strap*
:
:
Put on the shoulder strap (1).
Adjust length of strap so that the
:
:
:
Slacken off the screw.
Adjust shaft to required length.
Tighten the screw firmly.
spring hook
(2), with the unit
attached, is at about the same
height as your right hip.
Every new chain has to be broken in
for about 2 to 3 minutes.
After breaking in the chain, check
chain tension and adjust if
necessary – see chapter "Checking
Chain Tension".
*
see “Guide to Using this Manual“
20
HT 73
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL HT 73 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)