English / USA
Checking Chain Lubrication Fitting the Harness
1
1
2
The bayonet-type oil tank filler cap with
its hinged grip can be opened and
closed without tools.
The saw chain must always throw off a
small amount of oil.
3
:
Always check chain lubrication and
the oil level in the tank before
starting work.
:
To open the tank, swing the grip (1)
to the vertical position.
:
Turn the filler cap counterclockwise
Never operate your pruner without
chain lubrication. If the chain is run
dry, the whole cutting attachment
will be irretrievably damaged within
a very short time.
as far as stop and remove.
:
:
Fill up with chain oil.
To close the oil tank, place the filler
cap in position with the grip upright,
making sure the recesses (2) are in
alignment.
Shoulder strap and full harness*
Inadequate lubrication can be caused by
a dirty oil strainer: Have the oil strainer
cleaned or replaced by your servicing
dealer.
:
Put on the shoulder strap or harness
(1).
:
:
Turn the filler cap clockwise as far
Adjust length until the springhook
is at about the height of your
right hip with the unit attached.
:
as stop.
(3)
Every new chain has to be broken in
for about 2 to 3 minutes.
Fold the grip down so that it is flush
with the top of the cap.
After breaking in the chain, check
chain tension and adjust if
necessary – see chapter
"Checking Chain Tension".
*
see “Guide to Using this Manual”
20
HT
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL HT |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)