STIHL HT Attachment Chainsaw Owners Manual

English / USA
Checking and Replacing
the Chain Sprocket
:
Measure groove depth –
with scale on filing gauge – see
"Special Accessories" – in area
used most for cutting on Rollomatic
bars.
:
Remove the chain sprocket cover,
chain and guide bar.
Replace the chain sprocket:
a
Chain type    Chain pitch   Minimum
groove depth
5.0 mm
Picco-Mini
3/8" P
(0.20")
If groove depth is less than specified:
Replace the guide bar.
The drive link tangs will otherwise
scrape along the bottom of the groove –
the cutters and tie straps will not ride on
the rails.
after using two Oilomatic chains or
sooner
:
if the wear marks (dimension a)
on the sprocket are deeper than
0.02
in (0.5 mm) – the life of the
chain would otherwise be reduced.
Use reference gauge (special
accessory) to check the depth of the
wear marks.
The chain sprocket is driven via a friction
clutch and must be replaced by a
servicing dealer.
STIHL recommends that you have
maintenance and repair work performed
only by a STIHL servicing dealer.
The service life of the chain
sprocket is prolonged if it is used
with two chains in rotation.
Use only original STIHL replacement
sprockets.
HT
23
Product Specification
CategoriesChainsaw Manuals, STIHL Chainsaw Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 66 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website