english / USA
Standard Setting
Rule of thumb
Warm up the engine for about 3
minutes.
:
:
:
:
Shut off the engine.
Mount the CombiTool.
Turn high speed screw (H) about 1/4
turn for every 1000 m (3300 ft)
change in altitude.
Engine stops while idling
Check the air filter and clean or
Carry out standard setting.
:
Turn idle speed screw (LA) slowly
clockwise until the engine runs
smoothly – the tool must not move.
replace as necessary.
:
:
:
:
Check the spark arresting screen
and clean or replace as necessary.
Warm up engine for about 3
minutes.
Turn high speed screw (H)
3
CombiTool moves when engine is
idling
counterclockwise (max. /4 turn)as
At high altitude
Turn high speed screw (H) clock-
wise (leaner) no further than stop.
far as stop.
:
Carefully screw the low speed
screw (L) down onto its seat. Then
open it one full turn counter-
clockwise.
:
Turn idle speed screw (LA) counter-
:
clockwise until the toolstops moving
and then turn the screw about
1
direction.
At sea level
another / to 1 turn in the same
2
:
:
Start and warm up the engine.
Turn high speed screw (H) counter-
clockwise (richer) no further than
stop.
:
Adjust idle speed with the idle speed
screw (LA) so that the tool does
move.
Erratic idling behavior, engine stops
even though setting of LA screw is
correct, poor acceleration
Maximum engine speed is normally
reached with the standard setting in
each case.
Fine Tuning for Operation at High
Altitude or at Sea Level
A slight correction of the setting of the
high speed screw (H) may be necessary
if engine power is not satisfactory when
operating at high altitude, at sea level or
after changing the cutting tool.
Idle setting too lean:
Turn low speed screw (L)
1
:
counterclockwise (about /4 turn)
until the engine runs and
accelerates smoothly.
Adjusting Idle Speed
It is usually necessary to change the
setting of the idle speed screw (LA)
after every correction to the low speed
screw (L).
22
KM 85, KM 85 R
Categories | Multi-Task Kombi Equipment Manuals, Stihl Kombi Equipment Manuals |
---|---|
Tags | STIHL KM 85 |
Download File |
|
Language | English, Español |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)