English / USA
Adjusting the Throttle Cable
A properly adjusted throttle cable is
the precondition for correct
operation in the full throttle, starting
throttle and idle positions.
14
15
Adjust the throttle cable only after
the unit is fully assembled – the
control handle must be in the normal
operating position.
15
15
14
:
Use a suitable tool to push the slide
to the bottom of the slot (see
illustration).
Fitting the Throttle Cable
Swiveling the Handlebar
Transport position:
Do not kink the throttle cable or lay
it in tight radii – make sure the
throttle trigger moves freely.
:
Release the wing screw (3) and
unscrew it until the handlebar (7)
can be turned clockwise.
:
Press the throttle cable (14) into the
retainers (15).
:
:
Turn the handlebar 90° and then
swing the handles down.
Throttle Cable Adjustment
Tighten down the wing screw firmly.
On control handles with slide:
Working position:
:
Go to chapter "Adjusting the
Throttle Cable".
:
Reverse the sequence described
above to swing the handles up
and turn the handlebar counter-
clockwise.
*
see "Guide to Using this Manual"
KM 90, KM 90 R
13
| Categories | Multi-Task Kombi Equipment Manuals, Stihl Kombi Equipment Manuals |
|---|---|
| Tags | STIHL KM 90 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)