English / USA
Definitions
1.
Carburetor Box Cover Twist
Lock.
10. Guide Bar.
Supports and guides the saw chain.
20. Throttle Trigger.
Controls the speed of the engine.
Lock for carburetor box cover.
11.
Oilomatic Saw Chain.
A loop consisting of cutters, tie
straps and drive links.
21. Throttle Trigger Interlock.
Must be depressed before the
throttle trigger can be activated.
2.
3.
Carburetor Adjusting Screws.
For fine tuning the carburetor.
Spark Plug Boot.
12. Oil Filler Cap.
22. Rear Handle.
Connects the spark plug with the
ignition wire.
For closing the oil tank.
The support handle for the right
hand, located at or toward the rear
of the saw.
13.
Muffler.
Reduces engine exhaust noise and
directs the exhaust gases.
4.
5.
Chain Sprocket Cover.
Covers the clutch and the sprocket.
23. Rear Hand Guard.
Gives added protection to
operator's right hand.
Chain Sprocket.
The toothed wheel that drives the
saw chain.
14. Front Hand Guard.
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handlebar.
Guide Bar Nose.
6.
Chain Brake.
The exposed end of the guide bar.
(not illustrated, see chapter
“Tensioning the Saw Chain”.
A device to stop the rotation of the
chain if activated in a kickback
situation by the operator's hand or
by inertia.
15. Front Handle (handlebar).
Handle bar for the left hand at front
of saw.
Clutch.
7.
8.
Chain Tensioner.
Permits precise adjustment of chain
tension.
16. Decompression valve.
Releases compression pressure to
make starting easier.
Couples engine to chain sprocket
when engine is accelerated beyond
idle speed.
Chain Catcher.
17. Starter Grip.
(not illustrated).
Helps to reduce the risk of operator
contact by a chain when it breaks
or comes off the bar.
The grip of the starter, for starting
the engine.
Anti-Vibration System.
The anti-vibration system includes a
number of buffers designed to
reduce the transmission of
vibrations created by the engine
and cutting attachment to the
operator's hands.
18.
19.
Master Control Lever.
Lever for choke control, starting
throttle, run and stop switch
positions.
9.
Bumper Spike.
Toothed stop for holding saw steady
against wood.
Fuel Filler Cap.
For closing the fuel tank.
(not illustrated).
MS 290, MS 310, MS 390
55
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 290, STIHL MS 310, STIHL MS 390 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated STIHL MS 290 310 390 Chainsaw Owners Manual 5.0 out of 5.0 based on 1 product reviews. Good job.. Wasn't hard to understand.