english
Oil Quantity
Control
During operation
After long period of full-throttle
operation
Check chain tension frequently
A new chain has to be retensioned more
often than one that has been in use for
some time.
Allow engine to run for a short while at
idle speed so that engine heat can be
dissipated by flow of cooling air. This
protects engine-mounted components
(ignition, carburetor) from thermal
overload.
1
Chain cold:
Tension is correct when chain fits snugly
against the underside of the bar and can
still be pulled along the bar by hand.
Retension if necessary – see
“Tensioning the Saw Chain”.
After finishing work
Different quantities of oil are required for
different bar lengths, types of wood and
cutting techniques.
:
Slacken off the chain if you have
Chain at operating temperature:
The chain stretches and begins to sag.
The drive links must not come out of the
bar groove – the chain may otherwise
jump off the bar.
retensioned it at operating
temperature during cutting work.
Use the adjusting screw (1) (on
:
underside of machine) to vary the
oil feed rate as required.
The chain contracts as it cools
down. If it is not slackened off, it
could damage the crankshaft and
bearings.
:
For average oil feed rate, turn
Retension the chain – see “Tensioning
the Saw Chain”.
adjusting screw to “E“ (Ematic
position).
Always slacken off the chain after
finishing work. The chain contracts
as it cools down. If it is not
:
:
To increase oil feed – turn adjusting
Storing your saw for a short period:
Wait for engine to cool down. To avoid
condensation, fill the fuel tank and keep
the machine in a dry place, well away
from sources of ignition, until you need it
again.
screw clockwise.
To reduce oil feed – turn adjusting
screw counter-clockwise.
slackened off, it can damage the
crankshaft and bearings.
Your chain must always be wetted
with a film of lubricant.
Storing for a long period:
See “Storing the Machine”.
40
MS 360
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 360 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)