english
Tensioning rewind spring
When starter rope is fully extended it
must still be possible to rotate the rotor
at least another half turn. If this is not the
case, the spring is overtensioned and
could break. Take one turn of rope off the
rotor.
2
3
4
4
:
Fit the fan housing on the
crankcase.
:
Set the Master Control lever to $
:
:
Refit the pawls (4) in the rotor.
Fit the washer (3) on the starter
:
Make a loop in the unwound starter
6
post.
rope and use it to turn the rope rotor
six full revolutions in the direction of
the arrow.
:
Use screwdriver or suitable pliers to
install spring clip (2) on starter post
and engage it on the pawls – the
spring clip must point clockwise –
see illustration.
:
:
Hold the rotor steady – pull out and
straighten the twisted rope.
Release the rope rotor – let go of
rope slowly so that it winds onto the
rotor.
The starter grip must locate firmly in the
rope guide bush. If the grip droops to
one side: Add one more turn on rope
rotor to increase spring tension.
:
Push the remaining rope into the
starter grip so that the nipple (6) is
flush with the grip.
MS 360
47
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 360 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)