English / USA
Buttress roots
B
C
45°
45°
A
If the tree has large buttress roots, cut
into the largest buttress vertically first
(horizontally next) and remove the
resulting piece.
C
B
Gunning sight
Escape path
Conventional cut
First clear the tree base and work area
from interfering limbs and brush and
clean its lower portion with an ax.
C = felling notch - determines the
direction of the fall
For a conventional cut:
Then, establish two paths of escape (B)
and remove all obstacles. These paths
should be generally opposite to the
planned direction of the fall of the tree
(A) and about at a 45° angle. Place all
tools and equipment a safe distance
away from the tree, but not on the
escape paths.
:
Properly place felling notch
perpendicular to the line of fall,
close to the ground.
Cut down at approx. 45-degree
angle to a depth of about 1/5 to 1/4
of the trunk diameter.
When making the felling notch, use the
gunning sight on the shroud and housing
to check the desired direction of fall:
:
Position the saw so that the gunning
sight points exactly in the direction you
want the tree to fall.
:
:
Make second cut horizontal.
Remove resulting 45-degree piece.
MS 650, MS 660
21
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 650, STIHL MS 660 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)