English / USA
Maintaining and Sharpening
Saw Chain
Correctly sharpened chain
A properly sharpened chain slices
through wood effortlessly and requires
very little feed pressure.
A
B
3/8
Do not work with a dull or damaged
chain as it will increase the physical
effort required, cause high vibrations,
produce unsatisfactory cutting results
and a higher rate of wear.
3
The chain pitch (e.g. / ") is marked on
A = Filing angle
B = Side plate angle
:
:
Clean the chain.
8
the depth gauge end of each cutter.
Check the chain for cracks in the
Use only special saw chain
sharpening files. Other files have the
wrong shape and cut.
links and damaged rivets.
:
Replace any damaged or worn parts
of the chain and match the new
parts to the shape and size of the
original parts.
Chain type
Angle (°)
Select file diameter according to chain
pitch – see table “Sharpening Tools”.
A
B
Rapid-Micro (RM)
Rapid-Super (RS)
Picco-Micro (PM/PMN)
30
30
30
85
60
85
It is absolutely essential to comply
with the angles and dimensions
specified below. If the saw chain is
incorrectly sharpened – and in
particular if the depth gauge is set
too low – there is a risk of increased
kickback of the chainsaw, with
resulting risk of injury.
You must observe certain angles when
resharpening the chain cutter.
Cutter shapes:
Micro = Semi-chisel
Super = Full chisel
The specified angles A and B are
obtained automatically if the
recommended files or sharpening tools
and correct settings are used.
52
MS 650, MS 660
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 650, STIHL MS 660 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)