English / USA
Definitions
1.
Carburetor Box Cover Twist
10. Bumper Spike.
20. Master Control Lever.
Lever for choke control, starting
throttle, run and stop switch
positions.
Lock.
Toothed stop for holding saw steady
against wood.
Lock for carburetor box cover.
2.
Spark Plug Boot.
11. Guide Bar.
Connects the spark plug with the
ignition wire.
Supports and guides the saw chain.
21. Throttle Trigger.
Controls the speed of the engine.
12.
Oilomatic Saw Chain.
A loop consisting of cutters, tie
straps and drive links.
3.
4.
Carburetor Adjusting Screws
22. Throttle Trigger Interlock.
Must be depressed before the
throttle trigger can be activated.
For fine tuning the carburetor.
Handle Heating Switch.
For switching the electric handle
heating on and off.
13. Oil Filler Cap.
For closing the oil tank.
23. Rear Handle.
The support handle for the right
hand, located at or toward the rear
of the saw.
14.
Muffler.
5.
6.
Chain Sprocket Cover.
Reduces engine exhaust noise and
directs the exhaust gases.
Covers the clutch and the sprocket.
24.
Rear Hand Guard.
Chain Sprocket.
15. Front Hand Guard.
Gives added protection to
operator's right hand.
The toothed wheel that drives the
saw chain.
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handlebar.
7.
Chain Brake.
Guide Bar Nose.
A device to stop the rotation of the
chain if activated in a kickback
situation by the operator's hand or
by inertia.
The exposed end of the guide bar.
(not illustrated, see “Tensioning the
Saw Chain”.
16. Front Handle.
Handle bar for the left hand at front
of saw.
8.
9.
Chain Tensioner.
17. Decompression Valve.
(automatically resetting)
Reduces compression resistance -
to make engine starting easier -
when activated.
Clutch.
Permits precise adjustment of chain
tension.
Couples engine to chain sprocket
when engine is accelerated beyond
idle speed.
Chain Catcher.
(not illustrated).
Helps to reduce the risk of operator
contact by a chain when it breaks
or comes off the bar.
18.
Starter Grip.
Anti-Vibration System.
The grip of the starter, for starting
the engine.
The anti-vibration system includes a
number of anti-vibration elements
designed to reduce the
19.
Fuel Filler Cap.
For closing the fuel tank.
transmission of vibrations created
by the engine and cutting
attachment to the operator's hands.
(not illustrated).
MS 650, MS 660
59
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 650, STIHL MS 660 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)