Toro Custom Command Metal Owners Manual

5.
6.
Repeat steps 3 and  4 to set a run  time for each station  you wish to
assign to  the selected program.
Repeat steps 2 through  5 for each program as necessary.
MASTER VALVE/PUMP START ON/OFF
The Custom  Command enables automatic  operation of the  Master
Valve/Pump Start  output circuit to  be controlled independently  for
each watering program. For  example, if a program is used for drip
irrigation and  the system pump is not  required, the Master
Valve/Pump Start  output circuit can  be shut off whenever that
program begins operation.
The factory setting  is ON  for each program. Use the  steps below to
select the  operation of this  feature for each program as necessary.
1.
2.
3.
4.
Turn the  function dial to  the Station   Times
position.
Select Program A,  B, C or D with the  Program    switch.
Press the NEXT button  repeatedly until  MAST ER  VALVE is displayed.
Press the OFF or  ON button to display the  operation of the  master
valve/pump start output  for the  selected program.
5.
Repeat steps 2 through  4 for each program as necessary.
SETTING PROGRAM START  TIME(S)
This procedure is used to set the watering cycle start time(s) for each
program. A maximum of 16 start times can be allocated to the four
programs in any manner. Each start time will initiate a sequential
watering cycle of all stations with an assigned run time in the program.
Note:  When  16 start times have been  allocated, the  display will show
NONE  REMAINING  when  attempting to  assign additional  start times.
To set  program cycle start  time(s):
1.
2.
3.
Turn the  function dial to  the Program   Start  Times        position.
Select Program A,  B, C or D with the  Program    switch.
Use the  + and/or buttons  to display the start  time.
Note:  To remove a start  time, adjust the  time to display   OFF
(located between  11:59 p.m. and 12:00 a.m.).
4.
5.
Press the NEXT button  to assign another  start  time to the  program.
Repeat steps 2 through  4 for each program as necessary.
12
Programming the Controller
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website