Toro Sentinel Map To Installation Instructions Catalog

Wall-Mount Cabinet Installation
Figure 2
1.
Position the upper support bracket on the wall
with the joggle edge up to accept the mating
upper cabinet bracket. The support bracket must
be level and at a height approximately 2" (51 mm)
above eye level to enable the Sentinel control
module display to be easily viewed.
Upper Cabinet
Bracket
2.
Mark the two mounting screw hole locations and
drill pilot holes for the screws or screw anchors.
Upper Support
Bracket
Note: Use 3/8" (10 mm) diameter fasteners to
attach the cabinet support brackets. If  installing
the cabinet on dry wall or masonry,  install the
appropriate size and type screw anchors.
3.
Secure the support bracket to the wall.  Hang the
cabinet on the wall by engaging the  upper
cabinet bracket and the support bracket.
4.
5.
6.
7.
8.
Draw a pencil line the entire length  of the lower
support bracket.
Screw Anchors
Remove the cabinet from the wall and  remove
the lower support bracket from the cabinet.
Place the lower support bracket on the  wall
aligning it with the pencil mark.
Mark the two screw hole locations and  drill pilot
holes for the mounting screws or screw  anchors.
Secure the bottom support bracket to the  wall.
*
Note: On early model cabinets, conduit access
holes are only provided for power and one field
wire conduit. Additional conduit access holes for
earth ground, additional field wire conduit, optional
sensor wires and optional external antenna must
be cut or punched by the installer. All conduit
access holes and knock-outs are provided on
current production cabinets.
Lower Support
Bracket
Figure 3
9.
Remove optional conduit knock-outs as required
for installation. See *Note   above.
10.
Hang the cabinet on the the wall  mount support
bracket. The bottom edge of the cabinet  should
now rest squarely on the lower support  bracket.
PROGRAMMING
INSTRUCTIONS
1
4
2
5
3
6
F1
F2
F3
F4
7
8
9
11.
12.
Secure the cabinet to the lower support  bracket
using the carriage bolts and nuts removed  in
Step 5 above.
O FOF N
0
O NY E S
ESC
CLUSTER / SCHEDULES
ELECT
PROGRAMS
ELECT
ENTER
Install electrical conduit for all wiring connections
per local and national code. See Figure 3.
3/4"
Flexible
Conduit From
Cabinet Base To
Junction Box
1/2"
Conduit
For Sensor
Wires (Optional)
3/4"
For Power Wires
Conduit
1/2"
Conduit For
2" Conduit For Field
Earth Ground
Wiring (2548 Stations)
2
Wiring (1224 Stations)
" Conduit For Field
1 1/2" Conduit For External
Antenna (Optional)
2
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 6 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website