repairs, adjustments, or inspections. Never place
your hand in the discharge or collector openings.
Use a stick or wooden broom handle to unclog the
discharge opening.
• Never direct discharge at bystanders or allow
anyone in front of unit.
•
Disengage
power
to
collector/impeller
when
transporting or not in use.
•
•
Take all possible precautions when leaving the unit
unattended. Disengage the collector/impeller, shift
into neutral, stop the engine, and remove the key.
•
Use only attachments and accessories approved
by the manufacturer of snow thrower (such as
wheel weights, counter weights, cabs, etc.).
When cleaning, repairing, or inspecting, make
certain collector/impeller and all moving parts have
stopped. Disconnect spark plug wire and keep
away from plug to prevent accidental starting.
•
•
Never operate the snow thrower without good
visibility or light. Always be sure of your footing and
keep a firm hold on the handles. Walk, never run.
Muffler and engine become hot and can cause a
burn. Do not touch.
•
•
Do not run engine indoors, except when starting
engine and transporting snow thrower in or out of
building.
Open
doors.
Exhaust
fumes
are
4. MAINTENANCE AND STORAGE
dangerous.
•
Check shear bolts, engine mounting bolts, etc., at
frequent intervals for proper tightness to be sure
equipment is in safe working condition.
Do not clear snow across the face of slopes.
Exercise extreme caution when changing direction
on slopes. Do not attempt to clear steep slopes.
•
Never store the machine with fuel in the fuel tank
•
•
Never operate snow thrower without guards, plates,
or other safety protection devices in place.
inside a building where ignition sources are
present, such as hot water and space heaters,
clothes dryers, and the like. Allow engine to cool
before storing in any enclosure.
Never operate snow thrower near glass enclosure,
automobiles, window wells, drop off, etc., without
proper adjustments of snow thrower discharge
angle. Keep children and pets away.
• Always refer to operators manual instructions for
important details if snow thrower is to be stored for
an extended period.
•
•
Do not overload machine capacity by attempting to
clear snow at too fast a rate.
• Run machine a few minutes after throwing snow to
prevent freeze up of collector/impeller.
Never operate the machine at high transport
speeds on slippery surfaces. Look behind and use
care when backing.
• Check clutch controls periodically to verify they
engage and disengage properly and readjust if
necessary.
Refer
to
operators
manual
for
adjustment instructions.
WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who
read, understand and follow the warnings and instructions in this manual and on the machine.
.
YAWAGNI HTOLCDNA
TEEF, SDNAHPEEK
REGUA GNI TATOR
WARNING
-
MORF YRUJNI DI OVA 1. STOP ENGINE BEFORE REMOVING
DEBRIS AND SERVICING UNIT
2. KEEP CLEAR OF IMPELLER WHILE
ENGINE IS RUNNING
3
. NEVER DIRECT DISCHARGE AT
BYSTANDERS OR WINDOWS OR
ALLOW ANYONE IN FRONT OF
UNIT
4
. THOROUGHLY INSPECT THE AREA
WHERE THE EQUIPMENT IS TO BE
USED AND REMOVE ALL DOOR
MATS, SLEDS, BOARDS, WIRES AND
OTHER FOREIGN OBJECTS
REGNAD
5
. REFER TO OWNERS MANUAL FOR
FULL INSTRUCTIONS
3396MW
Safety Labels found on your unit.
3
| Categories | MTD Snow Blower Manuals, Snow Blower Manuals, Yard Man Snow Blower Manuals |
|---|---|
| Tags | MTD 31AE553F401, MTD 31AE573H401, MTD Snow Blower Manual, Yard Man 31AE553F401, Yard Man 31AE573H401 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | 31AE553F401, 31AE573H401, Yard-Man, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)