Making
Adjustments
Shift Cable
If the full range of speeds (forward and reverse) cannot
be achieved, refer to the Figure 15 and adjust the shift
cable as follows:
1.
Placeposition.the shift lever in the fastest forward speed
2. LoosenSee Fig.the15.hex nut on the shift cable index bracket.
3.
Pivotcable.the bracket downward to take up slack in the
Retighten the hex nut.
4.
WARNING
Figure 16
Read, understand,
and follow all instruc-
tions and warnings
on the machine and
in this manual before
operating.
Figure 1
Friction
Wheel
Drive Control
Refer to the Final Adjustment section of the Set-Up
instructions to adjust the drive control. To further check
the adjustment, proceed as follows:
Never attempt to
make any adjust-
ments while the
engine is running,
except where speci-
fied in operator’s
manual.
1. Drain the gasoline out of your snow thrower’s engine,
and place a piece of plastic film under the gas cap to
avoid spillage.
Drive
Plate
Axle Supp.
Brkt.
Opening
2.
Tip the snow thrower forward, allowing it to rest on
the auger housing.
3.
Remove the frame cover underneath the snow
thrower by removing the self-tapping screws. See
Figure 16.
Figure 1
4.
5.
With the wheel drive control released, check if there
is clearance between friction wheel and drive plate in
all positions of the shift lever. See Figure 17.
With the drive control lever engaged, check if the
friction wheel solidly contacts the drive plate. See
Figure 17. If not, adjust as follows:
a. Loosen the jam nut on the traction drive cable
and thread the cable in or out as necessary.
b. Retightencorrect adjustmentthe jam nutis reached.to secure the cable when
Reassemble the frame cover.
6.
NOTEearlier,: removeIf you placedit now.plastic film under the gas cap
14
Categories | MTD Snow Blower Manuals, Snow Blower Manuals, Yard Man Snow Blower Manuals |
---|---|
Tags | MTD 769-03247, MTD Snow Blower Manual, Yard Man 769-03247 |
Download File |
|
Document Type | Owner's Manual |
Language | English |
Product Brand | Yard-Man, 769-03247, Snow Blower |
Document File Type | |
Publisher | mtdproducts.com |
Wikipedia's Page | MTD Products |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)