PowerShift operation
Belt routing
Assembly
Install Discharge Chute And
Chute Handle (Fig. 3)
Note:
Determine left and right sides of the
snowthrower by standing in the normal
operator’s position behind the handles.
Models 38412 & 38418
1.
2.
Place chute handle over chute ring.
Install Wheels (Fig. 2)
Insert discharge chute between chute ring and
chute handle. Align holes.
1.
Carefully turn machine onto its left side. Place a
wood block under the left axle end.
3.
4.
Secure back of chute and handle to center hole in
chute ring with a carriage bolt and lock nut.
Position nut on outside of chute.
2.
Slide the short spacer and a wheel onto the right
axle end. The side of the wheel with six spokes
must face the center of the machine.
Note:
Chute ring may be rotated to ease
assembly of discharge chute.
Secure chute and handle to remaining holes in
chute ring and tighten all nuts SECURELY.
3.
4.
Slide a pushnut onto the end of the axle.
Using a hammer, strike the pushnut to seat the
nut FIRMLY in place.
Install Chute Crank (Fig. 4)
5.
6.
Turn the machine over on its right side so that
the left axle end is pointing up.
Models 38433 & 38438
1.
Insert flattened end of chute crank through hole
in shroud while aligning mounting bracket with
holes in lower handle. Slowly rotate crank until
flattened end fits into hidden gear opening and
chute ring turns with crank. Make sure plastic
bushing is fully inserted into hole in mounting
bracket, then secure mounting bracket to handle
with (2) capscrews and locknuts.
For the left side, slide the long spacer and a
wheel onto the left axle end. The side of the
wheel with six spokes must face the center of the
axle.
7.
Place a wood block under the right axle end.
Repeat steps 3 and 4.
8
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38412, Toro 38418, Toro 38433, Toro 38438, Toro CCR 2400, Toro CCR 3000 |
| Model Year | 1999 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 9900001 - 9999999 |
| Product Name | 38412, 38418, 38433, 38438 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 4 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)