CARBURETTOR
Assembly
!
Refer to the carburettor in question on the
next eight pages. A pressure test, see
page 100, should be carried out after
assembling and before the carburettor is
refitted to the saw.
WARNING!
The fuel used in the chain saw
poses the following hazards:
1.
The fluid and its vapours are
poisonous.
Can cause skin irritation.
Is highly inflammable.
2.
3.
Plugs
”Semi fixed jet”/”fixed jet”
When cleaning the carburettor the plugs
must be removed.
Reassemble as follows:
Some carburettors have an extra jet (semi
fixed jet). The jet is of brass and is located
in the metering unit and is used to give a
fuel supplement. On average 10% of the
fuel passes through the jet.
1.
2.
Place the plug in the hole with the
convex side facing upwards.
Below or next to the jet is a screen which
needs to be cleaned.
Expand the plug by using a punch on
the top side.
Reassemble the jet and/or screen in one
of the following ways:
1.
Put together the unit and fit it in the
carburettor by means of a punch (Some
Tillotson models).
2.
Fit the jet with screen and lock washer.
English –
91
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 242XP, Husqvarna 246, Husqvarna 254XP, Husqvarna 257, Husqvarna 262XP, Husqvarna 268, Husqvarna 268K, Husqvarna 272K, Husqvarna 272S, Husqvarna 272XP, Husqvarna 281XP, Husqvarna 288XP, Husqvarna 3120XP, Husqvarna 36, Husqvarna 394XP, Husqvarna 40, Husqvarna 41, Husqvarna 42, Husqvarna 45, Husqvarna 51, Husqvarna 55, Husqvarna 61 |
| Model Year | 1997, 1998, 1999, 2000, 2001, 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)