Installing the Blade
Cleaning the Underside of the
Mower Housing
1.
Position the blade onto the spindle and blade driver,
with the curved blade tips pointing toward the mower
and the blade driver nesting in the recess of the blade
(Fig. 22).
To ensure best performance, keep the underside of the
mower housing clean. Be especially careful to keep the
kickers free of debris (Fig. 26).
2.
3.
Install the accelerator, lock washer, and blade bolt
(Fig. 22).
Tighten the blade bolt to 50 ft-lb (68 Nm).
WARNING
POTENTIAL HAZARD
757
•
Operating the mower without the accelerator in
place could cause the blade to flex, bend, or
break.
1
Figure 26
WHAT CAN HAPPEN
1.
Kickers
•
A broken blade could cause serious injury or
death to the operator or bystanders.
HOW TO AVOID THE HAZARD
Washing Method
•
Do not operate the mower without the
accelerator.
1.
Position the mower on a flat, concrete or asphalt
surface near a garden hose.
2.
3.
Start the engine.
Lubricating the Self–propel
Drive
Hold the running garden hose at handle level and
direct the water to flow on the ground just in front of
the right rear tire (Fig. 27).
1.
Wipe the grease fittings on the rear height-of-cut
adjustors (Fig. 25) with a clean rag.
The blade will draw in water and wash out clippings.
Let the water run until you no longer see clippings
being washed out from under housing.
1
1
1018
1093
Figure 25
Figure 27
1.
Grease fitting
1.
Rear right wheel
2.
Install a grease gun onto each fitting in turn and gently
apply one or two pumps of #2 multi-purpose lithium
grease to each.
4.
Stop the engine.
5. Turn off the garden hose.
IMPORTANT: Excess grease may damage seals and
prevent proper wheel clutch operation.
6. Start the mower and let it run for a few minutes to dry
out the moisture on the mower and its components.
7.
While the engine is running, engage and disengage the
traction drive several times to dry it out.
15
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 20022, Toro 20023, Toro 20025, Toro 20027, Toro 20029, Toro 20061 |
| Model Number | 20022, 20023, 20025, 20027, 20029, 20061 |
| Model Year | 1999 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 9900001 - 9999999 |
| Product Name | Toro Recycler Mower, R-21S |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Swath | 21 inch |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 20 oz. (.6l) 30w or 10w-30 / API SH or higher |
| Gearbox Lubricant | 3 oz. (92gm) #2 Lithium grease |
| Engine Motor Model # | 12H802-1767-E1 |
| Engine Motor Size | 6 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | Personal Pace |
| Transmission Type | Gear |
| Spark Plug | Champion RJ19LM |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 4)
Lawn and Garden readers have rated Toro 20022 20023 20025 20027 20029 20061 21-Inch Lawn Mower Operators Manual, 1999 4.0 out of 4.0 based on 2 product reviews. Good mower, but has always been hard to restart after warmed up. Starts much easier with air filter removed. Suspect blocked exhaust port, and am looking for an engine manual.
Getting harder and harder to start!