2.
3.
Hold the blade control bail against the upper handle
(Fig. 8).
Adjusting the Cutting Height
Each wheel is adjusted individually with a wheel height
adjustment lever. Cutting heights are 1, 1-1/2, 2, 2-1/2, 3
and 3-1/2 inches (25, 38, 51, 64, 74 and 86 mm).
Pull the starter handle lightly until resistance is felt,
then pull it sharply (Fig. 8). Allow the rope return to
the handle slowly.
1
DANGER
2
POTENTIAL HAZARD
•
Adjusting the height-of-cut levers could bring
your hands into contact with the moving blade.
WHAT CAN HAPPEN
•
Contact with a rotating blade can cause serious
injury.
3
m-4207
HOW TO AVOID THE HAZARD
Figure 8
•
Stop the engine and wait for all movement to
stop before adjusting the cutting height.
1.
2.
Blade control bail
Upper handle
3. Starter handle
• Do not put your fingers under the mower
housing when adjusting the height-of-cut.
Note: If the engine fails to start after three (3) pulls,
repeat steps 1–3.
1.
To change the cutting height, pull the adjusting lever
toward the wheel and move it to the desired position
(Fig. 10).
Stopping the Engine
Release the blade control bail. Both the engine and blade
will stop. See your dealer immediately if they do not.
1
1021
Self–propel Drive
Figure 10
1.
Wheel height adjustment lever
To operate the self-propel drive, simply walk forward with
your hands on the upper handle. As you move forward,
the upper handle will slide toward the mower, activating
the self–propel drive. The faster you walk, the farther the
handle will slide and the faster the mower will propel
(Fig. 9).
2.
Release the height adjust lever and seat it securely in
the notch.
Note: Set all four (4) wheels at the same height.
Note: The mower propels at the maximum speed when the
upper handle is pushed as far forward as possible.
Operating Tips
To slow down or stop, simply slow your walking speed or
stop (Fig. 9). If, when backing up after self–propelling,
the mower does not roll backward freely, nudge the
mower forward about an inch without engaging the
self–propel drive, then pull the mower backward.
General Tips
•
Review the safety instructions and read this manual
carefully before operating the mower.
•
Clear the area of sticks, stones, wire, branches, and
other debris which could be picked up or hit by the
blade and become thrown objects.
•
•
•
Keep everyone, especially children and pets, away
from the area of operation.
Avoid striking trees, walls, curbs, or other solid
objects. Never deliberately mow over any object.
m–4206
If an object is struck, or the mower starts to vibrate,
immediately stop the engine, disconnect the spark plug
wire, and examine the mower for damage.
Figure 9
8
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 20022, Toro 20023, Toro 20025, Toro 20027, Toro 20029, Toro 20061 |
| Model Number | 20022, 20023, 20025, 20027, 20029, 20061 |
| Model Year | 1999 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 9900001 - 9999999 |
| Product Name | Toro Recycler Mower, R-21S |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Swath | 21 inch |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 20 oz. (.6l) 30w or 10w-30 / API SH or higher |
| Gearbox Lubricant | 3 oz. (92gm) #2 Lithium grease |
| Engine Motor Model # | 12H802-1767-E1 |
| Engine Motor Size | 6 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | Personal Pace |
| Transmission Type | Gear |
| Spark Plug | Champion RJ19LM |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 4)
Lawn and Garden readers have rated Toro 20022 20023 20025 20027 20029 20061 21-Inch Lawn Mower Operators Manual, 1999 4.0 out of 4.0 based on 2 product reviews. Good mower, but has always been hard to restart after warmed up. Starts much easier with air filter removed. Suspect blocked exhaust port, and am looking for an engine manual.
Getting harder and harder to start!