Use an approved gasoline container.
16. Operate the snowthrower only when there is
good visibility or light. Always maintain secure
footing and balance and keep a firm grip on the
handles, especially when operating in reverse.
Walk; never run.
Fill fuel tank outdoors, not indoors.
NEVER ADD FUEL TO AN ENGINE
THAT IS RUNNING OR HOT. Engine
must be cool to reduce potential fire hazard.
Be attentive when using the snowthrower, and
stay alert for holes in the terrain and other
hidden hazards. Be careful when clearing snow
from a gravel drive because stones could be
picked up and thrown if skids are not adjusted so
auger/impeller housing clears all rocks.
Open doors if engine will be started in the
garage because exhaust fumes are
dangerous and could possibly be deadly. Do
not run engine indoors.
Wipe up any spilled gasoline. Reinstall
gasoline container cap and snowthrower
fuel tank cap securely before starting the
Do not make any adjustments while the engine is
running, with the exception of carburetor
Never direct discharge of snow or operate
snowthrower near bystanders, glass enclosures,
automobiles and trucks, window wells or a
drop–off without proper adjustment of the snow
chute and deflector angle.
ROTATING IMPELLER OR AUGER CAN
CUT OFF OR INJURE FINGERS OR
HANDS. STAY BEHIND THE HANDLES
AND AWAY FROM DISCHARGE
OPENING WHILE OPERATING THE
SNOWTHROWER. KEEP FACE, HANDS,
FEET, AND ANY OTHER PART OF YOUR
BODY OR CLOTHING AWAY FROM
CONCEALED, MOVING OR ROTATING
Clear snow from slopes by going up and down,
never across the face. Use caution when
changing directions. Use lower gear when
operating on slopes. Never clear snow from
21. Do not overload the snowthrower by clearing
snow at too fast a rate.
DO NOT USE SNOWTHROWER ON A
BEFORE ADJUSTING, CLEANING,
REPAIRING, AND INSPECTING THE
SNOWTHROWER, AND BEFORE
UNCLOGGING THE DISCHARGE
CHUTE, SHUT ENGINE OFF AND WAIT
FOR ALL MOVING PARTS TO STOP.
ALSO, PULL WIRE OFF SPARK PLUG
AND KEEP WIRE AWAY FROM THE
PLUG TO PREVENT ACCIDENTAL
STARTING. USE A STICK, NOT YOUR
HAND, TO REMOVE OBSTRUCTIONS
FROM DISCHARGE CHUTE.
If a foreign object is hit or snowthrower vibrates
abnormally, stop engine by turning key to OFF
and wait for all moving parts to stop. Pull wire
off spark plug and check snowthrower
immediately for possible damage, an obstruction
or loose parts. Vibration is generally a sign of
trouble. Repair any damage before starting
engine and operating snowthrower again.
Do not touch engine while it is running or soon
after it is stopped because the engine will be hot
enough to cause a burn. Do not add oil or check
oil level in crankcase when engine is running.
Before leaving the operator’s position—behind
the handles—remove key from switch.
Never operate snowthrower at high transport
speeds on slippery surfaces. Use care when
Allow engine to warm up outdoors before
|Categories||Snow Blower Manuals, Toro Snow Blower|
|Tags||Toro 38062, Toro 622, Toro 9900001|
|Document Type||Operator's Manual|
|Serial Number||9900001 - 9999999|
|Product Name||Toro 622 38062 Snowthrower|
|Product Brand||Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
|Product Series||Snowthrower, Two Stage Small Frame|
|Engine Oil Type||21 oz. (.62l) 5w-30 or 10w / API SH or higher|
|Gearbox Lubricant||7 oz. (198gm) Lubriplate MAG-1|
|Engine Motor Model #||HSK60-76011C|
|Engine Motor Size||6 hp|
|Engine Motor Type||4 Cycle CARB1, EPA1|
|Transmission Speed||3 Forward/1 Reverse|
|Transmission Type||Friction Disc|
|Document File Type|
|Wikipedia's Page||Toro Company|
(3 votes, average: 4.67 out of 5) Lawn and Garden readers have rated Toro 622 38062 Snow Blower Operators Manual, 1999 4.7 out of 5.0 based on 3 product reviews.
Fine snowblower, no complaints
Thank you very Much!!!!!!