Poulan 2250 2450 2550 Chainsaw Owners Manual

action may push  the guide bar rapidly back
toward the operator.  Either of  these events
may cause  you to  lose control  of  the saw
which could  result in serious injury  or even
death.  DO NOT RELY UPON ANY OF THE
DEVICES BUILT INTO  YOUR SAW.  YOU
SHOULD USE THE SAW PROPERLY AND
CAREFULLY TO  AVOID KICKBACK.   Re-
duced--kickback  guide bars  and  low--kick-
back  saw chains  reduce  the  chance  and
magnitude   of  kickback   and  are   recom-
mended. Your saw has a low kickback chain
and bar as original equipment. Repairs  on a
chain brake  should  be made by  an autho-
rized servicing dealer.  Take your unit to the
place of  purchase if purchased  from a ser-
vicing  dealer, or  to the  nearest authorized
master service dealer.
Symmetrical Guide Bar
Large Radius Tip
S  Low--Kickback  Chain,  designed   with  a
contoured  depth  gauge   and  guard  link
which  deflect  kickback  force  and  allow
wood to gradually ride into the cutter. Low--
Kickback  Chain  has  met  kickback  per-
formance requirements  when tested on a
representative  sample of chain  saws be-
low 3.8 cubic inch displacement  specified
in ANSI B175.1.
Contoured
Depth Gauge
Elongated Guard Link
S  Tipcontactinsomecasesmaycause    alight-
ning fast  reverse  REACTION, kicking  the
guide bar up and back toward the operator.
Deflects
kickback force
and allows wood
to gradually ride
into cutter
Pinching the saw chain along the top of the
guide bar may push  the guide bar rapidly
back toward the operator.
Low---Kickback
Chain
S
S  Either of these reactions may cause you to
lose control of the saw which  could result
in  serious  injury.Do not  rely  exclusively
upon the safety devices built into your saw.
Can Obstruct Material
Not a Low---Kickback Chain
WARNING:
Computed  kickback
angle (CKA) listed on your saw and listed in
CKA table  below  represents angle  of
S  Front Hand Guard, designed to reduce the
chance of yourleft hand contacting thechain
if your hand slips off the front handlebar.
S  Position of front and rear  handlebars, de-
signed with distance between handles and
“in-line” with each  other.  The spread and
“in-line” position of the  hands provided by
this design work  together to give balance
and resistance  in  controlling the  pivot of
the saw back toward  the operator if kick-
back occurs.
the
kickback your  bar and  chain combinations
will  have when  tested  in accordance  with
CSA and ANSI standards. When purchasing
replacement  bar and chain,  considerations
should  be given to  the  lower CKA  values.
Lower CKA values represent safer angles to
the user, higher values  indicate more angle
and higher kick energies.  Computed angles
represented in the non-activated  column in-
dicate  total  energy  and  angle  associated
without activation  of the chain  brake during
kickback. Activated  angle represents  chain
stopping time  relative to activation  angle of
chain brake and resulting kick angle of saw.
In all  cases lower CKA  values represent  a
safer operating environment  for the user.
The following guide bar and chain combina-
tions  meet kickback  requirements  of  CSA
Z62.1, Z62.3, & ANSI B175.1 when used on
saws listed  in this manual.   Use of bar and
chain combinations other than those listed is
not  recommended  and  may not  meet  the
CKA requirements per standard.
CHAIN BRAKE AND CKA ANGLE
S  Chain Brake, designed to stop the chain in
the event of kickback.
WARNING:
WE DO  NOT REP-
RESENT  AND  YOU  SHOULD  NOT AS-
SUME  THAT  THE  CHAIN  BRAKE  WILL
PROTECT  YOU  IN  THE   EVENT  OF  A
KICKBACK.  Kickback is a lightning fast ac-
tion which throws the bar and rotating chain
back and up toward the operator.  Kickback
can be caused by allowing contact of the bar
tip in the danger  zone with any hard object.
Kickback can also be caused by pinching the
sawchain along the top of the guide bar. This
5
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags, ,
Model Year2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 17 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(2 votes, average: 4 out of 4)
Lawn and Garden readers have rated Poulan 2250 2450 2550 Chainsaw Owners Manual 4.0 out of 4.0 based on 2 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Poulan 2250 2450 2550 Chainsaw Owners Manual SKU UPC Model
Gerald DeFillippo on Nov 30, 2015. Download Manual

Easy and quick, no bullshit, thanks....


Gerald DeFillippo on Nov 30, 2015. Download Manual

Easy and quick, no bullshit, thanks....


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website