CHAIN TENSION (Including units
with chain already installed)
NOTE: When adjusting chain tension,
make sure the chain brake nuts are finger
tight only. Attempting to tension the chain
when the chain brake nuts are tight can
cause damage.
Mount the Bar
Checking the tension:
Use the screwdriver end of the chain adjust-
ment tool (bar tool) to move the chain around
the bar. If the chain does not rotate, it is too
tight. If too loose, the chain will sag below the
bar.
6.
Carefully remove the chain from the pack-
age.
Hold chain with the drive links as
shown.
Tip of
Bar
Chain Adjustment
Chain Brake Nuts
Tool (Bar Tool)
Adjusting the tension:
CUTTERS MUST FACE IN
DIIRECTION OF ROTATION
Chain tension is very important.
Chain
stretches during use. This is especially true
during the first few times you use your saw.
Always check chain tension each time you
use and refuel your saw. You can adjust the
chain tension by loosening the chain brake
nuts and turning the adjusting screw 1/4 of a
turn while lifting up on the bar.
Cutters
Depth Gauge
S If chain is too tight, turn adjusting screw 1/4
turn counterclockwise.
S If chain is too loose, turn adjusting screw
1/4
turn clockwise.
Drive Links
Adjusting
Screw
Guide Bar
Chain Brake Nuts
Adjusting Screw -- 1/4 Turn
Place chain onto the sprocket
7.
8.
Place chain over and behind clutch, fitting
the drive links in the clutch drum sprocket.
Fit bottom of drive links between the
teeth in the sprocket in the nose of the
guide bar.
S Lift up the tip of the bar and securely tight-
en the chain brake nuts with the bar tool.
S
Recheck chain tension.
9.
Fit chain drive links into bar groove.
Pull guide bar forward until chain is snug
in guide bar groove. Ensure all drive
links are in the bar groove.
10.
Chain Brake
Nuts
11.
12.
Now, install chain brake making sure the
adjusting pin is positioned in the lower
hole in the guide bar. Remember this pin
moves the bar forward and backward as
the screw is turned.
WARNING:
If the saw is operated
Install chain brake nuts and finger tighten
only. Once the chain is tensioned, you
will need to tighten chain brake nuts.
with a loose chain, the chain could jump off
the guide bar and result in serious injury.
7
| Categories | Chainsaw Manuals, Poulan Chainsaw Manuals |
|---|---|
| Tags | Poulan 2250, Poulan 2450, Poulan 2550 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw |
| Document File Type | |
| Publisher | poulan.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 4)
Lawn and Garden readers have rated Poulan 2250 2450 2550 Chainsaw Owners Manual 4.0 out of 4.0 based on 2 product reviews. Easy and quick, no bullshit, thanks....
Easy and quick, no bullshit, thanks....