2.
Clean around the dipstick (Fig. 12).
Important
Do not use methanol, gasoline containing
methanol, gasohol containing more than 10% ethanol,
premium gasoline, or white gas. Using these fuels can
damage the engine’s fuel system.
1
3
Important
Do not use gasoline that is more than 30
2
days old.
Danger
In certain conditions, gasoline is extremely
flammable and highly explosive. A fire or
explosion from gasoline can burn you and others
and can damage property.
933
• Fill the fuel tank outdoors, in an open area, and
when the engine is cold. Wipe up any gasoline
that spills.
Figure 12
1.
2.
Dipstick
3. Fuel tank cap
•
Do not fill the fuel tank completely full. Add
gasoline to the fuel tank until the level is 1/4 to
Filler hole
1/2
in. (6 to 13 mm) below the bottom of the
filler neck. This empty space in the tank allows
the gasoline to expand.
Never smoke when handling gasoline, and stay
away from an open flame or where a spark may
ignite the gasoline fumes.
3.
4.
Remove the dipstick by rotating the cap
counterclockwise and pulling it out (Fig. 12).
•
Slowly pour about 3/4 of the crankcase capacity of oil
into the crankcase.
•
•
Store gasoline in an approved fuel container and
keep it out of the reach of children.
Never buy more than a 30-day supply of
gasoline.
5.
6.
Wipe the dipstick clean with a clean cloth.
Install the dipstick into the filler neck, then remove it.
Note: To ensure an accurate oil level reading, you must
fully install the dipstick.
Danger
7.
8.
Read the oil level on the dipstick.
If the oil level is below the Add mark on the dipstick,
slowly pour only enough oil into the filler hole to raise
the oil level to the Full mark on the dipstick.
When fueling, under certain circumstances, a
static charge can develop, igniting the gasoline. A
fire or explosion from gasoline can burn you and
others and damage property.
Important
run the engine; engine damage will result. Drain the excess
oil until the oil level on the dipstick reads Full.
Do not overfill the crankcase with oil and
•
Always place gasoline containers on the ground
and away from your vehicle before filling.
9.
Insert the dipstick into the filler neck and rotate the cap
clockwise until it is tight.
• Do not fill gasoline containers inside a vehicle or
on a truck or trailer bed because interior
carpets or plastic truck bed liners may insulate
the container and slow the loss of any static
charge.
• When practical, remove gasoline-powered
equipment from the truck or trailer and refuel
the equipment with its wheels on the ground.
Filling the Fuel Tank with
Gasoline
For best results, use clean, fresh, lead-free gasoline with an
octane rating of 87 or higher. To ensure freshness, purchase
only the quantity of gasoline that you expect to use in 30
days. Using unleaded gasoline results in fewer combustion
deposits and longer engine life. You may use leaded
gasoline if unleaded gasoline is not available.
•
If this is not possible, then refuel such
equipment on a truck or trailer from a portable
container, not from a gasoline dispenser nozzle.
If you must use a gasoline dispenser nozzle, keep
the nozzle in contact with the rim of the fuel
tank or container opening at all times until
fueling is complete.
•
Important
Do not add oil to the gasoline.
12
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38543, Toro 824 Power Shift |
| Model Year | 2003 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 230000001 - 230999999 |
| Product Name | 38543 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Shift |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 24 oz. (.7l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | Auger 4.5 oz. (133ml) SAE 90 Gl-5 or 6 / Trans. 14.5 oz. (411.8 gm) Lubriplate Mag 1 |
| Engine Motor Model # | HMSK80-155645W |
| Engine Motor Size | 8 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 4 Forward/2 Reverse |
| Transmission Type | Gear |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)