2.
3.
4.
5.
6.
7.
8.
Align the holes in the auger/impeller housing with the
holes in the engine frame (Fig. 2).
Note: Position the belt cover mounting tabs to the rear
of the engine frame member.
Route the auger/impeller drive belt around the impeller
pulley (Fig. 2).
12. Lower the snowthrower onto its wheels.
13.
Check the adjustment of the impeller cable; refer to
steps 4 through 8 of Adjusting the Auger/Impeller Drive
Belt on page 21.
Secure the auger/impeller housing to the engine frame
with 6 flange-head bolts (3/4-inch).
Install the idler pulley assembly, aligning the idler
pulleys with the belts (Figs. 2 and 30).
14. Mount the upper belt cover to the engine frame with
3 flange-head bolts (1/2-inch) (Fig. 4).
Tip the snowthrower up on the front edge of the
auger/impeller housing, and block it in place.
1
Move the wheels to the rear position. Refer to
Operating the Power Shift Feature on page 16.
2
Push the latch arm to release the axle (Fig. 3).
3
166
1
Figure 5
1.
2.
Cable cover
3. Flange-head bolt (3)
Upper belt cover
15.
Slide the cable cover onto the cables and into the hole in
the belt cover (Fig. 5).
Installing the Shift Rod
mĆ5009
2
1.
Insert the upper ball joint stud through the front of the
shift bracket and secure it with a locknut (Fig. 6).
Figure 3
1.
Latch arm
2. Latch rod
2
9.
Pull up on the axle while holding in the latch arm
(Fig. 3).
3
4
10.
11.
Continue pulling the axle forward until the latch rod
springs into the locked position (Fig. 3).
1
5
Install the lower belt cover on the underside of the
auger/impeller housing and the engine frame with 2
1/2-inch
(1 millimeter) flange-head bolts (Fig. 4).
6
7
8
9
3
3
1
2
167
Figure 6
164
1.
2.
3.
4.
5.
Gear shift lever
Power Shift slot
Locknut
6.
7.
8.
9.
Jam nuts
Shift rod
Figure 4
1.
2.
Flange-head bolt (2)
Mounting tabs
3.
Lower belt cover (shown
from bottom)
Transmission lever
Lower ball joint
Shift bracket
Upper ball joint
9
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38543, Toro 824 Power Shift |
| Model Year | 2003 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 230000001 - 230999999 |
| Product Name | 38543 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Shift |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 24 oz. (.7l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | Auger 4.5 oz. (133ml) SAE 90 Gl-5 or 6 / Trans. 14.5 oz. (411.8 gm) Lubriplate Mag 1 |
| Engine Motor Model # | HMSK80-155645W |
| Engine Motor Size | 8 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 4 Forward/2 Reverse |
| Transmission Type | Gear |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)