Stopping the Engine
1.
2.
3.
Engage the auger to clear any remaining snow from
inside the housing.
Run the engine for a few minutes to dry off any
accumulated moisture.
Release the auger/impeller drive control lever and the
traction control lever (Fig. 13).
m-4060
Figure 21
4.
5.
Shift the traction drive into the N (Neutral) position.
Stop the engine by doing one of the following:
3. Fully engage the traction drive lever to move the wheels
into the alternate position (Figs. 21 and 22).
A. Move the throttle to the Slow position and remove
the ignition key.
Note: When shifting, you may need to slightly raise the
handle assembly to assist the wheel movement.
B. Move the throttle to the Stop position.
6.
7.
Close the fuel shutoff valve (Fig. 15).
Pull the recoil starter with a rapid, continuous, full-arm
stroke 3 or 4 times. This prevents the recoil starter from
freezing up.
8.
Wait for all moving parts to stop before leaving the
operating position.
179
Figure 22
Operating the Power Shift
Feature
4.
Release the speed shift control.
Move the wheels to the rear Power Shift position in heavy
or drifted snow. Leave the wheels in the front position for
light snow or for transporting the snowthrower.
Note: To shift the wheels manually when the engine is not
running, follow steps 1 and 2 and then lift up on the
handles to unlock the wheels.
With the engine running at full speed:
Freewheeling or Self-propel
Drive
1.
2.
Release the traction control lever (Fig. 13).
Move the speed shift control fully forward to the Power
Shift position and hold it there (Fig. 21).
You can operate the snowthrower with the self-propel
feature engaged or disengaged (freewheeling). When you
insert the axle pins through the outer axle holes and not
through the wheel hubs (Fig. 23), the snowthrower
freewheels. When you insert the axle pins through the holes
in the wheel hubs and the inner axle holes (Fig. 23) and
engage the traction control lever, the snowthrower propels
itself.
16
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38543, Toro 824 Power Shift |
| Model Year | 2003 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 230000001 - 230999999 |
| Product Name | 38543 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Shift |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 24 oz. (.7l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | Auger 4.5 oz. (133ml) SAE 90 Gl-5 or 6 / Trans. 14.5 oz. (411.8 gm) Lubriplate Mag 1 |
| Engine Motor Model # | HMSK80-155645W |
| Engine Motor Size | 8 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 4 Forward/2 Reverse |
| Transmission Type | Gear |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)