5.
6.
7.
Drain the oil.
7. Check the deflection of the chain by lifting up on it with
moderate pressure at the mid span. There should be a
Install the oil drain plug.
1/8
to 3/8 in. (3 to 10 mm) deflection (Fig. 33).
Fill the crankcase with oil. Refer to Filling the Engine
Crankcase with Oil on page 11.
8.
9.
Wipe up any spilled oil.
Connect the wire to the spark plug.
1
Lubricating the Drive Chain
186
Figure 33
Lightly lubricate the drive chain after every 15 operating
hours and at the end of the snowthrowing season.
1.
8.
9.
1/8 to 3/8 in. (3 to 10 mm)
deflection
1.
Disconnect the wire from the spark plug and ensure that
the wire does not contact the plug (Fig. 24).
If the deflection is not between 1/8 and 3/8 in. (3 and
10
mm), go to step 9; otherwise, return the snowthrower
2.
Lightly lubricate the drive chain with a chain lubricant
(Fig. 32).
to its upright position.
Loosen the 4 flange-head bolts (2 on each side) that
secure the transmission frame to the engine frame (Figs.
34
and 35).
1
181
Figure 32
1
1.
Drive chain
2
187
Figure 34
3.
4.
Wipe up any excess oil.
1.
Transmission
2.
Transmission frame
Connect the wire to the spark plug.
Adjusting the Drive Chain
1
Check the chain deflection after every 25 operating hours.
If the deflection mid span between the transmission and the
axle sprocket is not between 1/8 and 3/8 in. (3 and 10 mm),
adjust the drive chain.
1.
2.
Stop the engine and wait for all moving parts to stop.
189
Disconnect the wire from the spark plug and ensure that
the wire does not contact the plug (Fig. 24).
Figure 35
1.
Flange head bolts
3.
Drain the gasoline from the fuel tank. Refer to
Emptying the Fuel Tank on page 24.
10.
Pivot the rear of the transmission frame until the chain
deflection is between 1/8 and 3/8 in. (3 and 10 mm).
4.
5.
6.
Shift the wheels into the rear position.
Move the speed shift control into second gear.
11.
12.
Tighten the flange-head bolts.
Check the chain deflection.
Tip the snowthrower forward onto its auger housing and
block it so that it cannot fall.
23
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38543, Toro 824 Power Shift |
| Model Year | 2003 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 230000001 - 230999999 |
| Product Name | 38543 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Shift |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 24 oz. (.7l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | Auger 4.5 oz. (133ml) SAE 90 Gl-5 or 6 / Trans. 14.5 oz. (411.8 gm) Lubriplate Mag 1 |
| Engine Motor Model # | HMSK80-155645W |
| Engine Motor Size | 8 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 4 Forward/2 Reverse |
| Transmission Type | Gear |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)