AUGER HOUSING
AUGER HOUSING COMPONENTS
SCRAPER
The Power Max snow throwers are offered in two widths:
The scraper is a replaceable surface attached to the
leading edge of the auger housing. It is a wear part and
will need to be replaced periodically in the life of the
machine. There are two types of scrapers, fixed and
pivoting.
26”
and 28” (66cm and 71cm). The augers, auger shaft,
housing, and scrapers are made in both widths, but all
other auger components are the same. The auger case
halves, gears, impeller and impeller shaft, chute, etc. are
interchangeable.
Removal of the auger and traction system components
from the auger housing is covered in the Auger Gearbox
Section and in the two traction drive systems sections
(non-wheel clutch and wheel clutch).
Fixed Scraper
Because the fixed scraper is bolted solidly to the auger
housing it is intended to be raised slightly off the ground
to minimize catching on pavement cracks and solid
objects. The amount that it should be raised depends on
how rough the ground is. The scraper is adjustable as
the mounting holes are slotted (Fig. 069).
SKIDS
The skids are located on each side of the auger. The
skids are intended to be the component that touches
the ground and supports the auger. They are also the
means to adjust the auger height for different conditions
(Fig. 068).
Fig 069
MVC-896X
Scraper Replacement
Fig 068
MVC-769X
The scraper is attached with five carriage head bolts with
locknuts. Install the new scraper but do not tighten the
bolts until the scraper is adjusted.
See the scraper adjustment procedure to adjust the
skids.
Note: The skids are reversible. When one side
becomes worn out, remove the skid and turn
it over for a new surface.
Power Max Service Manual
6-1
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38595, Toro 38597, Toro 38610, Toro 38611, Toro 38614, Toro 38620, Toro 38621, Toro 38622, Toro 38624, Toro 38629, Toro 38630, Toro 38631, Toro 38632, Toro 38634, Toro 38635, Toro 38637, Toro 38637C, Toro 38639, Toro 38640, Toro 38642, Toro 38644, Toro 38650, Toro 38651, Toro 38652, Toro 38654, Toro 38657, Toro Power Max 1028LE, Toro Power Max 1028LXE, Toro Power Max 1128 OXE, Toro Power Max 1128OE, Toro Power Max 1128OXE, Toro Power Max 6000, Toro Power Max 726OE, Toro Power Max 726TE, Toro Power Max 826LE, Toro Power Max 826O, Toro Power Max 828 OXE, Toro Power Max 828LE, Toro Power Max 828LXE, Toro Power Max 828OXE |
| Model Year | 2004, 2005, 2007, 2008, 2009, 2010, 2011 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 250010001 - 250999999 |
| Product Name | Toro Power Max Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Size | 318cc |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)