ELECTRICAL
Power Max models have 3 very simple electrical
systems. Each is separate from the other so a problem
in one area will not affect the others.
The wires run from the ignition coil, under the blower
housing, over the foam pad to the ignition switch. The
other wire runs from the switch to the cylinder head bolt.
Make sure to secure the wires to the primer line with a
wire tie (Fig. 229).
ELECTRIC START SYSTEM
All models have an electric start system standard. All
4
cycle engines use the Tecumseh electric start system.
See the Tecumseh service manual for repair information.
The 2 cycle models have a Toro system. The 2 Cycle
electric start is covered in the E Engine Service Manual
Form # 492-0647.
LIGHTING
Some 4 cycle models have a light standard or light kit
available. There is no light kit for 2 cycle models.
The lighting system consists of an alternator coil, a wire
leading to the light fixture and the fixture itself. This
light operates whenever the engine is running. The
alternator is a Tecumseh part; replacement parts and
troubleshooting assistance are obtained through the
Tecumseh system.
Fig 229
MVC-864X
To test the switch remove the wires and attach a
continuity light or ohmmeter. When the switch is on there
should be no continuity. When the switch is off there
should be continuity between the terminals (Fig. 230).
The light fixture and the wire harness are Toro parts. The
light bulb is replaceable.
IGNITION SWITCH
All models have an on/off switch.
On the 4 cycle models the switch is an engine part and
is built into the carburetor heater box, next to the throttle.
Use Tecumseh service information for troubleshooting
and repair.
The 2 cycle models have a simple on/off switch mounted
in the rear engine cover. When the key is turned off, the
switch closes, the magneto primary is grounded to the
engine block and the engine stops. When turned to on,
the ground is disconnected allowing the ignition to fire.
Fig 230
MVC-192
See the engine section for access to the ignition switch
on 2 cycle models.
Power Max Service Manual
11-1
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38595, Toro 38597, Toro 38610, Toro 38611, Toro 38614, Toro 38620, Toro 38621, Toro 38622, Toro 38624, Toro 38629, Toro 38630, Toro 38631, Toro 38632, Toro 38634, Toro 38635, Toro 38637, Toro 38637C, Toro 38639, Toro 38640, Toro 38642, Toro 38644, Toro 38650, Toro 38651, Toro 38652, Toro 38654, Toro 38657, Toro Power Max 1028LE, Toro Power Max 1028LXE, Toro Power Max 1128 OXE, Toro Power Max 1128OE, Toro Power Max 1128OXE, Toro Power Max 6000, Toro Power Max 726OE, Toro Power Max 726TE, Toro Power Max 826LE, Toro Power Max 826O, Toro Power Max 828 OXE, Toro Power Max 828LE, Toro Power Max 828LXE, Toro Power Max 828OXE |
| Model Year | 2004, 2005, 2007, 2008, 2009, 2010, 2011 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 250010001 - 250999999 |
| Product Name | Toro Power Max Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Size | 318cc |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)