Poulan Pro PPB3416 PPB4218 Chainsaw Owners Manual

S  Clean the oil holes  and bar groove after
ter withanew oneafter every 50hours ofop-
eration, or annually, whichever comes first.
each 5 hours of operation.
1.
2.
3.
4.
Loosen 3 screws on cylinder cover.
Remove Sawdust From
Guide Bar Groove
Remove cylinder cover.
Remove air filter cover and air filter.
Cleantheair  filter usinghotsoapywater.
Rinsewithcleancoolwater.Air   drycom-
pletely before reinstalling.
Oil Holes
5.
6.
Reinstall air filter and air filter cover.
Reinstall cylinder cover  and 3 screws.
Tighten securely.
S  Burring of  guide  bar  rails  is  a  normal
process of rail wear. Remove these burrs
with a flat file.
Cylinder
Cover
Air Filter
Cover
S  Whenrailtopis  uneven,useaflatfiletore-
store square edges and sides.
File Rail Edges
and Sides
Square
Air Filter
Worn Groove
Correct Groove
Replace guide bar when the groove  is worn,
the guide bar is bent or cracked, or when ex-
cess heatingor burringoftherails  occurs.Ifre-
placementis necessary,useonlytheguidebar
specified for your saw in the repair parts list or
on the decal located on the chain saw.
CHECK FUEL MIXTURE LEVEL
S  See FUELING  ENGINE under  the  OP-
ERATION section.
LUBRICATION
INSPECT  MUFFLER  AND   SPARK
ARRESTING SCREEN
WARNING: Themuffler onthisprod-
uctcontains chemicals knowntothe  Stateof
California to cause cancer.
As the unit is used, carbon deposits build up
on the muffler  and spark arresting screen,
and must be removedto avoidcreating afire
hazard or affecting engine performance.
Replacethespark  arrestingscreen ifbreaks
occur.
Bar Oil
Fill Cap
S  See GUIDE BAR AND CHAIN OIL under
the OPERATION section.
Spark
Arresting
Screen
Exhaust
Outlet
Cover
INSPECT AND CLEAN UNIT AND
DECALS
S  After each  use, inspect  complete  unit for
loose or damaged parts. Clean the unit and
decals using a damp cloth with a mild deter-
gent.
S  Wipe off unit with a clean dry cloth.
Nut
CHECK CHAIN BRAKE
See  CHAIN  BRAKE in  the  OPERATION
section.
Muffler
CLEAN AIR FILTER
CLEANING  THE  SPARK ARREST-
ING SCREEN
CAUTION: Donotcleanfilteringasolineor
other flammable solvent to avoid creating a
firehazardor  producing harmfulevaporative
emissions.
Cleaning is required every  25 hours of op-
eration or annually, whichever comes first.
1.
Loosen and remove the nut from the ex-
Cleaning the air filter:
haust outlet cover.
A dirty air filter decreases the life and perfor-
mance of the engine andincreases fuelcon-
sumption  and harmful  emissions.  Always
clean your air filter after 10 tanks of fuel or 5
hours of  operation, whichever comes  first.
Clean more frequently in dusty conditions.A
used  air  filter   can  never  be  completely
cleaned. It is advisable to replaceyour air fil-
2.
3.
Remove the exhaust oulet cover.
Removespark arrestingscreen.Handle
screen carefully to prevent damage.
Clean the spark arresting screen gently
with  a wire  brush.  Replace screen  if
breaks are found.
4.
5.
Replace any broken or cracked muffler
parts.
15
Product Specification
CategoriesChainsaw Manuals, Poulan Pro Chainsaw Manuals
Tags,
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 19 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw
Document File TypePDF
Publisherpoulanpro.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website