Toro R Tek Duraforce Engine Snow Blower Service Manual

CARBURETOR
Assembly
4.   Apply one drop  of Loctite 242 or equivalent to the
seat threads, and install a new brass inlet fuel
valve seat (see Figure 31).
1.
2.
Install the high speed jet into the fuel nozzle.
If the nozzle has been removed, turn the carburetor
over.  Apply one drop of Loctite 242 blue or
equivalent to the nozzle threads, and install the
nozzle assembly into the carburetor body (see
Figure 29).
Figure 31
0893-041
5.
6.
Install a new inlet valve needle and clip on the float.
Install the float assembly with a new float hinge pin
in the bottom of the carburetor.  Ensure that the
hinge pin is positioned properly to keep the float
level.  The float should be free to move up and
down easily in the carburetor body.
Figure 29
0893-038
3.
Apply one drop of Loctite 242 blue to the threads,
and install the pilot jet (see Figure 30).
7.
Adjust float so height is 1/2 ± .03” (.76 mm) from
bowl flange (gasket not in place) to top of float (see
Figure 32).
Figure 30
0893-030
Figure 32
0893-054
23
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 65 pages
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website