If you leave the snowthrower plugged into a
power outlet, someone can inadvertently start
the snowthrower and injure people or damage
property.
Unplug the power cord whenever you are not
starting the snowthrower.
Figure27
StoppingtheEngine
6.
Firmly push in the primer 3 times with your thumb,
holding the primer in for a second before releasing it
each time (Figure 28).
1.
Move the throttle to the Stop position (Figure 29).
Figure28
Note: Take your glove off when you push in the
primer so that air cannot escape from the primer hole.
Figure29
2.
3.
Wait for all moving parts to stop before leaving the
operating position.
Note: Priming excessively may flood the engine and
prevent it from starting.
Close the fuel shutoff valve by rotating it clockwise
(Figure 30).
7.
Start the snowthrower using the recoil starter or the
electric starter (Figure 20).
Note: To use the electric starter, connect a power cord
to the electric starter and to a power outlet.
Important: To prevent damaging the electric
starter, run it no more than 10 times at intervals
of 5 seconds on, then 5 seconds off. If the engine
does not start after this series of attempts, allow the
starter to cool for at least 40 minutes before trying
to start it again. If the engine still does not start,
take the snowthrower to an Authorized Service
Dealer for service.
Figure30
8.
9.
Disconnect the power cord from the electric starter and
the power outlet (electric start only).
4.
Pull the recoil starter 3 or 4 times. This helps prevent
the recoil starter from freezing up.
When the engine starts, set the choke to the
3/4
to the 1/2 position. When the engine is warm, set the
choke to the Off position.
position. As the engine warms up, set the choke
OperatingtheTractionDrive
Important: To operate the traction drive, you
must operate the snowthrower with the self-propel
feature engaged. Refer to Freewheeling or Using the
Self-propel Drive.
1.
To engage the traction drive, squeeze the left hand
(traction) lever to the handgrip (Figure 31).
12
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38641, Toro Power Max 1028LXE |
| Model Number | 38641 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 270000001 - 270999999 |
| Product Name | Toro Power Max 1028 LXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | LH358SA-159626A |
| Engine Motor Size | 358cc |
| Engine Motor Type | 4 Cycle CARB3, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 1028LXE 38641 Snow Blower Operators Manual, 2007 5.0 out of 5.0 based on 1 product reviews. Bought the snowking 8 years ago , Need a Users Manuel