LubricatingtheHexShaft
5.
6.
If the oil level is low, add GL-5 or GL-6, SAE 85-95
EP transmission oil to the gearbox until the point of
overflow.
Lightly lubricate the hex shaft yearly with automotive engine
oil (Figure 49).
Note: Do not use synthetic oil.
Install the pipe plug in the gearbox.
ChangingtheEngineOil
Change the engine oil after the first 2 operating hours, then
yearly thereafter. If possible, run the engine just before
changing the oil because warm oil flows better and carries
more contaminants.
Max. fill: 26 oz. (0.77 l), type: automotive detergent oil with
an API service classification of SF, SG, SH, SJ, SL, or higher.
•
•
For temperatures above 32°F (0°C), use SAE 30W.
Figure49
1.
2.
Hexshaft
Aluminumfrictionplate
3.
Rubberwheel
For temperatures between 0°F and 32°F (-18°C to 0°C),
use SAE 5W30 or SAE 10W.
Important: Do not get oil on the rubber wheel or
the aluminum friction drive plate because the traction
drive will slip (Figure 49).
•
For air temperatures below 0°F (-18°C), use SAE 0W30.
Clean the area around the oil drain cap (Figure 48).
1.
1.
2.
Drain the gasoline from the fuel tank.
Tip the snowthrower forward onto its auger housing
and block it so that it cannot fall.
3.
Remove the back cover (Figure 50).
Figure48
1.
Oildraincap
2.
3.
Slide an oil drain pan under the drain extension and
remove the oil drain cap.
Drain the oil.
Note: Dispose of the used oil properly at a local
recycling center.
Figure50
1.
Backcover
4.
5.
Install the oil drain cap.
4.
5.
Move the speed selector lever to Position R2.
Fill the crankcase with oil. Refer to Filling the Engine
Crankcase with Oil.
Dip your finger in automotive engine oil and lightly
lubricate hex shaft.
6.
7.
8.
Move the speed selector lever to Position 6.
Lubricate the other end of the hex shaft.
Move the speed selector lever forward and rearward
a few times.
9.
Install the back cover and return the snowthrower to
the operating position.
19
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38641, Toro Power Max 1028LXE |
| Model Number | 38641 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 270000001 - 270999999 |
| Product Name | Toro Power Max 1028 LXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | LH358SA-159626A |
| Engine Motor Size | 358cc |
| Engine Motor Type | 4 Cycle CARB3, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 1028LXE 38641 Snow Blower Operators Manual, 2007 5.0 out of 5.0 based on 1 product reviews. Bought the snowking 8 years ago , Need a Users Manuel