5.
ConnectingtheWiretothe
Headlight
1.
Insert the wire connector on the loose end of the wire
straight into the back of the headlight until it is securely
in place (Figure 17).
Figure14
1.
Shortrod
2.
Longchutecontrolrod
4.
Insert the front end of the rod into the opening in the
back of the chute gear cover until it slides into the chute
gear (Figure 15).
Figure17
1.
Plastic clip on wire
connector
U-bolt
3.
Cabletie
2.
Note: Ensure that the plastic clip on the wire
connector is on the bottom (Figure 17).
2.
Secure a cable tie (from the loose parts bag) around the
wire and the handle about an inch (2.5 cm) below the
U-bolt (Figure 17).
6.
FillingtheEnginewithOil
Figure15
5.
6.
Align the holes in the nested ends of the rods and insert
Your snowthrower comes with 26 oz. of oil in the engine.
2
carriage bolts (in the loose parts bag) through the
short rod from the left side of the snowthrower (from
the operating position).
Note: Before starting the engine, check the oil level and
add oil if necessary.
Insert the cable clip that supports the deflector cable
onto the forward carriage bolt, and secure the carriage
bolts with locknuts from the loose parts bag (Figure 16).
Max. fill: 26 oz. (0.77 l), type: automotive detergent oil with
an API service classification of SF, SG, SH, SJ, SL, or higher.
•
•
For temperatures above 32°F (0°C), use SAE 30W.
For temperatures between 0°F and 32°F (-18°C to 0°C),
use SAE 5W30 or SAE 10W.
•
For air temperatures below 0°F (-18°C), use SAE 0W30.
1.
Remove the dipstick and slowly pour oil into the oil
fill tube to raise the oil level to the Full mark on the
dipstick. Do not overfill.(Figure 18).
Figure16
1.
Cableclip
2.
Deectorcable
7.
Hold the blue trigger cap down and rotate the Quick
Stick in a circle to ensure that the chute and deflector
operate smoothly.
9
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38641, Toro Power Max 1028LXE |
| Model Number | 38641 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 270000001 - 270999999 |
| Product Name | Toro Power Max 1028 LXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | LH358SA-159626A |
| Engine Motor Size | 358cc |
| Engine Motor Type | 4 Cycle CARB3, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 1028LXE 38641 Snow Blower Operators Manual, 2007 5.0 out of 5.0 based on 1 product reviews. Bought the snowking 8 years ago , Need a Users Manuel