Storage
RemovingtheSnowthrower
fromStorage
1.
Remove the spark plug and spin the engine rapidly using
the starter to blow the excess oil from the cylinder.
•
•
•
Gasoline vapors can explode.
2.
Install the spark plug by hand and then torque it to
15 ft-lb (20.4 N·m).
Do not store gasoline more than 30 days.
Do not store the snowthrower in an enclosure
near an open flame.
3.
4.
Connect the spark plug wire.
Perform the annual maintenance procedures as given in
the Recommended Maintenance Schedule.
•
Allow the engine to cool before storing it.
PreparingtheSnowthrower
forStorage
1.
2.
3.
4.
5.
6.
On the last refueling of the year, add fuel stabilizer to
fresh fuel as directed by the engine manufacturer.
Run the engine for 10 minutes to distribute the
conditioned fuel through the fuel system.
Loosen the hose clamp that secures the fuel line to the
valve and slide the fuel line off the fuel shutoff valve.
Open the fuel shutoff valve and allow the fuel to drain
out of the fuel tank into an approved fuel container.
Install the fuel line onto the fuel shutoff valve and
secure it with a hose clamp.
Run the snowthrower until the engine stops from
running out of fuel.
7.
8.
Prime the engine and start it again.
Allow the engine to run until it stops. When you can no
longer start the engine, it is sufficiently dry.
9.
Stop the engine and allow it to cool.
Remove the ignition key.
10.
11.
12.
Disconnect the spark plug wire.
Remove the spark plug, add 1 oz. (30 ml) of oil through
the spark plug hole, and pull the starter rope slowly
several times to distribute oil throughout the cylinder to
prevent cylinder corrosion during the off-season.
13.
14.
Loosely install the spark plug.
Dispose of any unused fuel properly. Recycle it
according to local codes, or use it in your automobile.
Note: Do not store stabilized fuel for more than
90
days.
15.
16.
Clean the snowthrower thoroughly.
Tighten all loose screws, bolts, and locknuts. Repair or
replace any damaged parts.
22
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38641, Toro Power Max 1028LXE |
| Model Number | 38641 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 270000001 - 270999999 |
| Product Name | Toro Power Max 1028 LXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | LH358SA-159626A |
| Engine Motor Size | 358cc |
| Engine Motor Type | 4 Cycle CARB3, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 1028LXE 38641 Snow Blower Operators Manual, 2007 5.0 out of 5.0 based on 1 product reviews. Bought the snowking 8 years ago , Need a Users Manuel