Important: Do not pull the recoil rope
to its limit or let go of the starter handle
when the rope is pulled out because the
rope may break or the recoil assembly may
be damaged.
The traction belt drive pulley is rotating
whenever the engine is running, even
when the traction drive is disengaged.
Contact with the pulley could cause
severe injury.
4.
As the engine warms up, slowly move the
choke lever to the Off position (Figure 16).
Stay away from moving pulleys and other
parts.
StoppingtheEngine
Move the throttle lever all the way to the left in the
Slow position (Figure 16).
StartingandStoppingthe
Engine
The impeller continues to rotate for a few
seconds after the engine is stopped, and can
cause serious personal injury.
StartingtheEngine
1.
Move the choke lever (located on the left
side of the engine) to the Choke position
(Figure 16).
Do not place any part of your body into the
impeller area until you a certain that it has
stopped.
Adjusting the Intake
HousingHeight
You can adjust the clearance between the air
intake housing and the ground by moving height
adjustment control to desired position. Set the
height to low (L) for vacuuming hard surfaces
such as sidewalks or driveways and to high (H)
for thick lush turf with a heavy covering of leaves
or clippings. The vacuum will work best when
you keep the intake as close to the ground as is
practical for the task you are performing.
1.
2.
Stop the engine.
Figure16
Tip the machine slightly to the rear to take the
weight off the castor wheels while adjusting.
1.
2.
3.
Chokelever
Throttlelever
Runposition
4.
5.
6.
Chokeposition
Slowposition
Fastposition
3. Move the height adjustment control forward to
lower the intake housing; move it to the rear to
raise the housing (Figure 17).
2.
Move the throttle lever (located on the right
side of the engine) to the Fast position
(Figure 16).
3.
Pull the recoil starter handle out until positive
engagement results, then pull it vigorously
to start the engine. Allow the recoil rope to
retract slowly.
14
| Categories | Blower Vacuum and Sweeper Manuals, Toro Blower and Vacuum Manuals |
|---|---|
| Tags | Toro 62925 |
| Model Number | 62925 |
| Model Year | 2008, 2009, 2010 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 280000001 - 280999999, 290000001 - 290999999,310000001 - 310999999 |
| Product Name | 206cc OHV Vacuum Blower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Blowers, Vacuums |
| Product Type | Blower, Vacuum |
| Product Series | Gas Powered, Lawn Vacuum / Sweeper / Blower |
| Swath | 76cm |
| Discharge | 1000 cfm/28 cu.m/min |
| Engine Manufacturer | Briggs & Stratton |
| Engine Motor Model # | 126302-0321-B8 |
| Engine Motor Type | 4 Cycle EPA2 |
| Transmission Speed | 1 Speed |
| Transmission Type | Capstan |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)