Checking the Auger Gearbox
Oil Level
Service Interval: Yearly—Check the auger gearbox oil
and add oil if necessary.
Figure 48
1.
2.
Move the snowthrower to a level surface.
1.
Oil drain cap
Clean the area around the pipe plug (Figure 47).
2.
Slide an oil drain pan under the drain extension and
remove the oil drain cap.
3.
Drain the oil.
Note: Dispose of the used oil properly at a local
recycling center.
4.
5.
Install the oil drain cap.
Fill the crankcase with oil. Refer to Filling the
Engine Crankcase with Oil.
Figure 47
Lubricating the Hex Shaft
3.
4.
Remove the pipe plug from the gearbox.
Service Interval: Yearly—Lubricate the hex shaft.
Check the oil level in the gearbox. The oil should be
at the point of overflowing at the filler opening.
Lightly lubricate the hex shaft yearly with automotive
engine oil (Figure 49).
5.
If the oil level is low, add GL-5 or GL-6, SAE 85-95
EP transmission oil to the gearbox until the point
of overflow.
Note: Do not use synthetic oil.
6.
Install the pipe plug in the gearbox.
Changing the Engine Oil
Service Interval: After the first 5 hours—Change the
engine oil.
Every 50 hours—Change the engine
oil. Change the engine oil every 25
operating hours when operating the
engine under a heavy load.
Figure 49
1.
2.
Hex shaft
3. Rubber wheel
Aluminum friction plate
If possible, run the engine just before changing the
oil because warm oil flows better and carries more
contaminants.
Important: Do not get oil on the rubber wheel
or the aluminum friction drive plate because the
traction drive will slip (Figure 49).
Max. fill: 20 oz. (0.55 l), type: automotive detergent oil
with an API service classification of SF, SG, SH, SJ, SL,
or higher. Use SAE 5W30 or SAE 10W30 oil. Refer to
your engine owner’s manual.
1. Drain the gasoline from the fuel tank.
2.
Tip the snowthrower forward onto its auger housing
and block it so that it cannot fall.
3.
Remove the back cover (Figure 50).
1.
Clean the area around the oil drain cap (Figure 48).
22
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38637, Toro Power Max 828OXE |
| Model Number | 38637 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 280000001 - 280999999 |
| Product Name | Toro Power Max 828 OXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Briggs & Stratton |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | 15D1040112E1 |
| Engine Motor Size | 249cc |
| Engine Motor Type | 4 Cycle CARB3, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)