4.
Remove the bracket thumb screw and the bracket
(Figure 52).
Figure 50
1.
Back cover
4.
Move the speed selector lever to Position R2.
5.
Dip your finger in automotive engine oil and lightly
lubricate hex shaft.
6.
7.
8.
Move the speed selector lever to Position 6.
Lubricate the other end of the hex shaft.
Move the speed selector lever forward and rearward
a few times.
9.
Install the back cover and return the snowthrower
to the operating position.
Figure 52
Replacing the Spark Plug
1.
Spark-plug wire
Bracket
3. Thumb screw
2.
Service Interval: Every 100 hours—Replace the spark
plug.
5.
Clean around the base of the spark plug (Figure 52).
Remove and discard the old spark plug.
Use a Champion QC12YC or equivalent spark plug.
6.
Note: To access the spark plug, you must first remove
the upper snow hood (Figure 51).
Note: You will need a ratchet wrench extension to
remove the spark plug.
7.
Set the gap between the electrodes on a new spark
plug at 0.030 inch (0.76 mm) (Figure 53).
Figure 53
1.
0.030 inch (0.76 mm)
Figure 51
8.
9.
Install the new spark plug and tighten it firmly.
1.
2.
Choke knob
3.
4.
Ignition key
Screw (2)
Upper snow hood
Install the bracket with the thumb screw that you
removed in step 4.
1.
Remove the choke knob and the ignition key
(Figure 51).
10.
11.
Ensure that the primer bulb hose and the ignition
wire are connected and clear of the carburetor
bracket.
2.
3.
Remove the 2 screws that secure the upper snow
hood to the snowthrower (Figure 51).
Secure the upper snow hood to the snowthrower
with the 2 screws that you previously removed.
Slowly remove the upper snow hood, ensuring that
the primer bulb hose and the ignition wire remain
connected.
23
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38637, Toro Power Max 828OXE |
| Model Number | 38637 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 280000001 - 280999999 |
| Product Name | Toro Power Max 828 OXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Briggs & Stratton |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | 15D1040112E1 |
| Engine Motor Size | 249cc |
| Engine Motor Type | 4 Cycle CARB3, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)