Toro Power Max 828OXE 38637 Snow Blower Operators Manual, 2008

wear safety glasses or eye shields during operation or
while performing an adjustment or repair.
•   Use only attachments and accessories approved by
the manufacturer of snow thrower (such as wheel
weights, counterweights, cabs, etc.).
Operation
Never operate the snow thrower without good
visibility or light. Always be sure of your footing, and
keep a firm hold on the handles. Walk; never run.
Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times.
Never operate the snow thrower without good
visibility or light.
Exercise extreme caution when operating on or
crossing gravel drives, walks, or roads. Stay alert for
hidden hazards or traffic.
Take all possible precautions when leaving the
machine unattended.  Shift into neutral, set the
parking brake, stop the engine and remove the key.
After striking a foreign object, stop the engine,
remove the wire from the spark-plug, thoroughly
inspect the snow thrower for any damage, and repair
the damage before restarting and operating the snow
thrower.
Maintenance and Storage
Check all fasteners at frequent intervals for proper
tightness to be sure the equipment is in safe working
condition.
If the unit should start to vibrate abnormally, stop
the engine and check immediately for the cause.
Vibration is generally a warning of trouble.
Never store the machine with fuel in the fuel tank
inside a building where ignition sources are present
such as hot water and space heaters, clothes dryers,
etc. Allow the engine to cool before storing in any
enclosure.
Stop the engine whenever you leave the operating
position, before unclogging the collector/impeller
housing or discharge guide, and when making any
repairs, adjustments, or inspections.
Always refer to owner’s guide instructions for
important details if the snow thrower is to be stored
for an extended period.
When cleaning, repairing, or inspecting, make certain
the collector/impeller and all moving parts have
stopped. Disconnect the spark-plug wire, and keep
the wire away from the plug to prevent accidental
starting.
Maintain or replace safety and instructions labels,
as necessary.
Do not run the engine indoors, except when starting
it and for moving the snow thrower in or out of the
building. Open the outside doors; exhaust fumes
are dangerous.
Run the machine a few minutes after throwing snow
to prevent freeze-up of the collector/impeller.
Toro Snowthrower Safety
Do not clear snow across the face of slopes. Exercise
extreme caution when changing direction on slopes.
Do not attempt to clear steep slopes.
The following list contains safety information specific
to Toro products or other safety information that you
must know.
Never operate the snow thrower without proper
guards, plates, or other safety protective devices in
place.
Rotating rotor blades can injure fingers or
hands. Stay behind the handles and away from the
discharge opening while operating the snowthrower.
Keep your face, hands, feet, and any other part
of your body or clothing away from moving or
rotating parts.
Never operate the snow thrower  near glass
enclosures, automobiles, window wells, drop-offs,
etc.  without proper adjustment of the snow
discharge angle. Keep children and pets away.
Before adjusting, cleaning, repairing, and inspecting
the snowthrower, and before unclogging the
discharge chute, stop the engine, remove the key,
and wait for all moving parts to stop.
Do not overload the machine capacity by attempting
to clear snow at too fast a rate.
Never operate the machine at high transport speeds
on slippery surfaces. Use care when reversing.
Use the snow cleanout tool, not your hands, to
remove obstructions from the discharge chute.
Never direct discharge at bystanders or allow anyone
in front of the unit.
Before leaving the operating position, stop the
engine, remove the key, and wait for all moving parts
to stop.
Disengage power to the collector/impeller when
snow thrower is transported or not in use.
3
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38637
Model Year2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number280000001 - 280999999
Product NameToro Power Max 828 OXE Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Swath28 inch
DischargeTwo Stage
Engine ManufacturerBriggs & Stratton
Gearbox Lubricant4.5 oz. (133ml) SAE 90 GL5 or higher
Engine Motor Model #15D1040112E1
Engine Motor Size249cc
Engine Motor Type4 Cycle CARB3, EPA2
Transmission Speed6 Forward/2 Reverse
Transmission TypeFriction Disc
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website