Toro Power Max 828OXE 38637 Snow Blower Operators Manual, 2008

12.
13.
Align the tab on the choke control knob with the
slot on the upper snow hood.
Connect the choke control knob to the choke shaft
on the carburetor.
Adjusting the Discharge Chute
Latch
If the discharge chute does not lock into the desired
position or does not unlock so that you can move it to
another position, adjust the discharge chute latch.
Figure 56
1.
Discharge chute latch
2.
Gear teeth
1.
Remove the fastener on the gear cover (Figure 54),
lift the front of the cover up, and slide it back and
out of the way.
Note: The latch is spring loaded and will naturally
move into the teeth of the gear (Figure 56).
4.
Remove any slack in the cable by pulling the cable
conduit rearward.
5.
6.
Tighten the bolt on the cable clamp.
Install and secure the gear cover.
Replacing the Drive Belts
Figure 54
If the auger/impeller drive belt or the traction drive belt
becomes worn, oil-soaked, or otherwise damaged, go
to www.Toro.com for additional service information or
have an Authorized Service Dealer replace the belt.
2.
Loosen the bolt on the cable clamp (Figure 55).
Replacing the Headlight Bulb
Use a GE 892 16W halogen light bulb. Do not touch
the bulb with your hands or allow dirt or moisture to
come into contact with the bulb.
1.
Remove the wire connector from the back of the
headlight (Figure 57).
Figure 55
1.
Cable conduit
2.   Cable clamp
3.
Grasp the cable conduit and move it toward the front
of the machine until the discharge chute latch fully
engages the gear teeth (Figure 55 and Figure 56).
Figure 57
2.
Turn the base of the bulb counterclockwise until it
stops (Figure 58).
24
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38637
Model Year2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number280000001 - 280999999
Product NameToro Power Max 828 OXE Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Swath28 inch
DischargeTwo Stage
Engine ManufacturerBriggs & Stratton
Gearbox Lubricant4.5 oz. (133ml) SAE 90 GL5 or higher
Engine Motor Model #15D1040112E1
Engine Motor Size249cc
Engine Motor Type4 Cycle CARB3, EPA2
Transmission Speed6 Forward/2 Reverse
Transmission TypeFriction Disc
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website