GENERAL SAFETY PRECAUTIONS
Checking chain lubrication
Chain drive sprocket
•
Check the chain lubrication each time you refuel. See
instructions under the heading Lubricating the bar tip
sprocket.
Aim the tip of the bar at a light coloured surface about
The clutch drum is fitted with one of the following drive
sprockets:
20
cm (8 inches) away. After 1 minute running at 3/4
throttle you should see a distinct line of oil on the light
surface.
A
Spur sprocket (the chain sprocket is welded on the
drum)
B
Rim sprocket (replaceable)
A
B
Regularly check the degree of wear on the drive sprocket.
Replace if wear is excessive. Replace the drive sprocket
whenever you replace the chain.
Needle bearing lubrication
If the chain lubrication is not working:
•
Check that the oil channel in the bar is not obstructed.
Clean if necessary.
Both versions of sprockets have a needle bearing on the
drive shaft, which has to be greased regularly (once a
week). NOTE! Use a high-quality bearing grease or
engine oil.
•
Check that the groove in the edge of the bar is clean.
Clean if necessary.
Checking wear on cutting equipment
Check the chain daily for:
•
Check that the bar tip sprocket turns freely and that
the lubricating hole in the tip sprocket is not blocked.
Clean and lubricate if necessary.
•
•
•
Visible cracks in rivets and links.
Whether the chain is stiff.
Whether rivets and links are badly worn.
Replace the saw chain if it exhibits any of the points
above.
We recommend you compare the existing chain with a
new chain to decide how badly the existing chain is worn.
File all the teeth to the same length. When the length of
the cutting teeth is reduced to 4 mm (5/32") the chain is
worn out and should be replaced.
If the chain lubrication system is still not working after
carrying out the above checks and associated measures
you should contact your service agent.
14
– English
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna CS2166, Husqvarna CS2172WH |
| Model Year | 2009, 2010, 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)